Search results for query: *

Gentlemen, Recently a 77 Fury sport came up for sale near me and before I go look at it I was hoping for some insight. The car appears to be in good shape, but any areas I should look at concerning rust (ontario car)? It has a 400 in it, I can't say if it's original or not, but where would be a...

Hey guys, been a while since I've been on here. I sold my 69 Coronet 500 4 years ago and bought a 72 Duster, which I have since sold. I've been having an itch to buy an old car again and I'm looking at a 67 Coronet 440 4 door 318 auto (and by looking, I mean I've found it online and I'm trying...

I just sold my 69 Coronet 500 with a 440. It was a driving project that I just didn't have time for anymore. I'm currently looking at three different classics, two muscle cars, and a 53 Ford Mainline. The muscle cars are a 1971 Chevelle SS clone with a built 454 and the other is the 65 Satallite...

So I'm tackling another problem on the car this weekend. The vent hose is tied into the same line as what I'm guessing is an old return line that is no longer hooked up. But before I take everything apart and put it back together the way I think it goes, I'd like some clarification. Is the vent...

I have a set of 17x8 eagle alloys with 4.5" back spacing. I'm planning on running 235/45r17's up front and either 275/40r17 or 285/40r17 out back. My question is, I've been looking at the numbers and I think they'll work on a stock Coronet, am I correct in my thinking? Also on a related topic...

Is there a trick to getting the headlight adjuster screws in. I've ordered some from Classic Industris for a 68-69 b body and I can not get them in. I know they are suppose to be a tight fit, but this is rediculous. I've installed these on many other vehicles in the past but never had this much...

I'm putting in some SpeedHut gauges in my 69, it has the base dash with the swept speedo. I'm building a whole new panel and even doing some work with the switch panel. My question is will the lower trim padding from a rally dash work on the non rally dash? What I'm basically wanting to do is...

So I've started some of my winter projects, but before I could get to far involved I noticed something that's had me a little sidetracked. The car has it's electrical gremlins that I've slowly been trying to fix, one being when I push the brakes my dome light comes on. Well today I also noticed...

This winter I'm hoping to knock out a few repairs and upgrades to my Coronet. I need to find a fix to my vent line leak, which I've started a thread for. I would also like to upgrade the ignition system, which is already underway with a new electronic ignition and vacuum advance. But I'm...

I've swapped out the old points for an electronic ignition and put on a new vacuum advance, but now I'm looking to get rid of the balance resistor on the firewall. What is the best way to do this? I've heard going to a MSD ignition is a good way, but is there anything else I should do while I'm...

I'm not going to bore anyone with a long story about how I got here, instead I'll just tell you the problem and hopefully get some help. I have fuel coming out of the fuel vent line in my car. When the car is running it's a steady stream. I don't think the fuel vent line is factory. It runs...

Took a drive down to New Hamburg Ontario yesterday to Moparfest, I didn't take the Coronet as I'm not sure it would've made the 2 hour drive in the heat. It was a fun day, finally got to see more Coronet's, usually all I see around here are Road Runners and Chargers. I snapped a few pics...

I'm in the middle of a carb swap and looking for a keyed power source for my electric choke. While doing this I was hoping to clean up some to the stray wires under the hood. I found this mess of wires by the alternator and was wondering if anyone knew what they were for. They are in a 1969...

Will 16x8 with 4.1" backspace work on a 69 Coronet? I hate to ask, but everything I find is 4.5" or 4.25". Also what would be a good tire combo with that rim, if it does work?

So I have a few more questions to ask... The first is, has anyone done this and was the outcome worth it? http://www.designed2drive.com I'm wanting to upgrade the ignition and starter systems on my Coronet and someone had mentioned this swap to me. It allows a GM HEI upgrade to the resistor...

I'm putting a set of Sidewinder heads on the 440 in my 69 Coronet. The 440 is a 74 and I'm leaving the bottom end alone. The engine runs good, but one of the heads is cracked, which is why I'm putting the Sidewinders on. Where I need the help is while I'm putting the heads on I thought about...

Has anyone done or seen a Charger filler neck on a Coronet? I've been thinking of swapping out the factory tank with a fuel cell, and thought maybe while I'm at it I'd relocate the filler neck.

https://www.youtube.com/watch?v=Uoi95SBE2wM

OK, I've had a leak in what I thought was the back window of my 69 Coronet. I took it to a glass shop that I trust, and they re-sealed the window, while doing it they found some holes, but I told them to seal it as best as possible for now and that I'd be redoing to body in a few years and I'd...

I want to put a wider and slightly taller rear tire on my 69 Coronet, and I'm not sure what I can run. I'm wanting to run a larger tire on my 15x7 500's. Every thread and bit of info I can find refers to x8, x9 or x10 rims, but what the widest I can run on a x7 rim. I currently have 215/65/15's...