Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I picked up a factory Denso unit out of a 2001 pickup to install in my 440 powered Coronet. Since it's modern trigger wire connector cannot be removed, I am thinking of adapting my cars wire to snap into this plug for easier hook-up. Any recommendations on where to find a female connector and...
Folks,
I have had a drive-line noise that bothered me all last summer. Sure enough, the Chinese wheel bearings in my front disc brake converted Coronet are pretty crunchy, when I finally took everything apart. The conversion had already been done before I got the car, and am somewhat...
I have finally worked up the energy to pluck the 440 back out of my car, to address a few things that I FUBAR'ed a couple years ago when putting it together. One of the issues being the rear main seal that has started to leak like a sieve.
Question is: what are the recommendations for...
I am in the process of doing some touch-up work on some interior pieces. I ordered a can of Herbs Interior Paint. I am very impressed with the color accuracy; not so much with the coverage. The rear trim panels in the pictures has 6 coats. I assume that since the paint is designed to...
For sale is a passengers side interior door card. Correct for a 1969 Coronet/Super Bee. Date stamped as Dec 6th 1968. It has been painted black, over the original pewter/silver color. Is in good used condition. The backing is not warped, but has one mounting clip hole that is a bit torn...
Got a specific question that I'm stumped on... Later this winter I will be installing a new set of interior panels into my '66 Coronet. In preparation, I recently removed the mismatched panels that were installed when I got the car and have stumbled across a head-scratcher. See pictures...
Is...
All,
I am on the hunt for the missing door cards to complete my interior (see photo). The style I am looking for originated on 69' Coronets and Superbee's. I have the passenger door panel, but all others are missing (drivers door and both in rear). They are available through Legendary, but I...
All,
I am on the hunt for the missing door cards to complete my interior (see photo). Research shows that this interior door panel is for a 1969 Coronet/Superbee. I have the passenger door panel, but all others are missing (drivers door and both in rear seat). They are available through...
All,
Got something that i may just be paranoid about. Just got my 440 powered 66' Coronet put together into running/driving condition a couple week ago with very few issues so far (knock on wood). After a minor carb (4160 holley) float adjustment the other day, I noticed that my fuel pressure...
Guy's,
I've got a set of Super Stock springs on my wish-list, and am stumped on what to do about rear shocks. I just welded in a new [shock mount] rear crossmember and installed new air shocks. Im wondering about Super Stocks because I have to put in too much air to get the rear to sit the way...
Got a rebuilt trans to toss behind the 440 going into my '66 Coronet. I was giving it a closer look before I bolt it up, and ran across something that may be a bit of a concern? It looks like there was an incorrect torque converter installed in the past, that may have been spinning, and wore a...
Front wheel and tire combo: 1966 Coronet with Torque Thrust 15'' x 7'', 3.75'' back space & 225/70R15 tires. Anyone running this set up? or know if there will be a clearance issue? Thanks in advance. Tyler
http://www.summitracing.com/parts/dou-d452-r/applications/year/1966
Does anyone have any experience with these Doug's headers? My gut tells me that 2'' tubes and 3 1/2'' collectors will have fitment issues; but the reviews I have read look pretty impressive. I am mainly looking to save a few...
I am in the market for a set of headers for a 66' Coronet 440, BB (440 RB).
#1: It is a column shift car; will I need a torque shaft to step over the driver side header?
#2: I know tti makes some good stuff, but does anyone have another suggestion for a 3/8 flange, ceramic coated header that...
I am in the market for a set of headers for a 66' Coronet 440, BB (440 RB).
#1: It is a column shift car; will I need a torque shaft to step over the header?
#2: I know tti makes some good stuff, but does anyone have another suggestion for a 3/8 flange, ceramic coated header that isn't...