Search results for query: *

As a follow up, I found a supplier for NOS tinted replacement PPG fixed quarter glass. He had 3 pieces on his shelf, of which I only needed 2. The price was steep, but the pieces were received, installed and look nice.

I need all linkage and rods inside door to make interior handle functional. I also need the required rods that install from the door lock to the handle. I have the interior and exterior handles, the locks and the rod to open the door from the outside.

thanks, but needing tinted

Check the neutral safety switch as others have stated, also make sure the adjustments are right on the shifter linkage next to the trans.

Check the gap on the distributor pick up. I went through this just this week. I would see spark on first revolution then spark would go away. Checked the usual stuff and chased down the gap in the distributor. Gapped it right, turned the key and the motor fired off on half a bump.

73 and 74 have holes in the glass to mount brackets and/or roller. 71 and 72 the glass sits into a channel held in place with rubber

Also, stationary glass has two holes to mount the bracket where rollup glass has 3 holes for the mechanism.

hahaha sometimes it feels like everyday is a black hole...... Ive sent an oem radio out to Tayman to be converted. Ive used the cheaper aftermarket replacements in several other cars and never felt the look was right and the sound quality was good enough. Ive read good comments and reviews on...

Looking for a supplier for new green tinted 1/4 panel glass. Everyone seems to have glass for hardtops but not coupes. Let me know if you know of a supplier you've found.

I too was having a problem finding a 28" that would work for my project. I contacted Cold Case and was told that I could order through Summit and if it didnt fit, I could return it. I wasnt too thrilled with that response so I contacted Griffin Radiator and found what I needed. Inlet and outlet...

Simple question. Has anyone upgraded their stock radio to include bluetooth? I know there are a couple businesses out there that will go through an original radio and up grade.

thanks for your help, all. I've got whats needed to get the shocks installed and move on to the next issue that arises.

Im rebuilding a car that someone else took completely apart. Does the rear shocks get mounted inside the c-channel or between the gas tank and the channel? Is there a special stud for the upper mount or will a standard grade 8 bolt suffice? Any spacers if mounted inside the channel? Theres...

Thanks for the response guys. I ordered the Bouchillon kits and am in the middle of the installation now.

Yep, reproduction. Not sure the manufacturer, just know the supplier. Seems that the compound just isn't as pliable as it should be... Was wondering if anyone else was having the same issue.

This is the second filler panel in less than two months. The bolts aren't overly torqued and everything lined up evenly when installed. Weather hasn't been below 40 recently either.

Piecing together someones abandoned project and don't know what's missing until I try to assemble something. I'm at the carb and kickdown linkage(s), at least where they're supposed to be and I have nothing. What's the opinion on stock versus aftermarket? Of course it's not a matching number...

ooops

Looking to replace bezel as the one I have is cut and cracked to the point it needs to be junked

Looking for a clean bezel for my current project. Mine has been hacked on and not worthy of the car at this point. Let me know what you have available.