Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It is a N.O.S 125 powershot wet kit. It goes that rich when the nitrous kicks in then leans back out to 11.5 which is where the target afr is set on the atomic efi controller. It is set at 12.5 at wot without nos. total timing is 34 degrees, and the timing is being retarded 4 degrees when nos...
I added a small 125 shot of nitrous. Question on numbers I'm getting. Car is a 68 coronet .030 over 440 ported and polished eddy heads roller valve train, flat top Pistons, 4 sp with 3.91 gear ratio making 425hp and 481 lb ft at the wheels. Added nitrous and getting 465 hp and 599 lb ft at the...
It all started with wanting to do a disc brake conversion. Just got the car back from the dyno tuning shop. Putting down 490 hp and 599 foot-pounds torque at the wheels I think it's time for a brake upgrade. Then I was going to redo the suspension. I wanted to put in power steering. After adding...
got billed for the Alterkation front end today, should have it by Monday or Tuesday!!! I will be selling the whole front end off of my 1968 Coronet,big block K-frame, control arms, drum brakes with manual master cylinder, torsion bars, manual steering gear, sway bar, etc.. Front end is in...
So I am finally going to order the Alterkation front suspension but I am hung up on what to do with the rear suspension. I cant decide if I should go with the Street-Lynx from Reilly Motorsports or Cal-tracs with the split mono leaf. The car is mostly a street car with the occasional trip...
Well that makes sense why I just received my check back from them. Finally decided to order the conversion kit then got a call from them asking which address they should send the check back to. Going Wilwood now.
I had a sending unit already installed with 2 fittings, when I was running the carb it was blocked off, so I ran the supplied -6 hose to the back and reduced it to 5/16 fuel hose and clamped it.
I actually had to buy 3 different "kits" and then a couple fittings. I bought the throttle body...
I just got done with the maiden voyage with the MSD Atomic EFI. All I can say is WOW what a difference so far. Still a few things to work out but overall very happy with it. I am running a .030 over 440 with 11:1 pistons, .590 lift solid roller cam with roller rockers, ported, polished and...
I am putting the MSD Atomic EFI on the Coronet. I decided to purchase the Aeromotive Phantom stealth fuel pump instead of going with the in line pump. I was just wondering if anyone else has installed one of these in there car. I am not worried about installing the pump in the tank, I am more...
so I'm going to order the Holley terminator efi package. I was just going to modify the sender and install the frame mounted fuel pump. I think I'd rather get a tank with the pump I'm it. I have looked around and found some, just wondering if anyone has any suggestions. Also the car right now...
The sun is shining today. Was supposed to go to a car show today thats why we were pushing to get it done. However we have been at the hospital since last night, hopefylly we will have a healthy baby boy by the end of the day. Another addition to the mopar world!!!!!!