Search results for query: *

For ht one possible anchor point:

Probably not, i think the windshield is different, because glass shop asked if its 4dr or 2dr car when i order new glass for my ht. Roof line is slightly different mby

Redid the roof rail seal and adjusted striker abit seemed to do the trick carry on...

Isee figured.. I can close the door from outside but requires solid push, cant grab the pad firmly enough from inside. The door alignment is prety close but i think the roof rail seal is giving me trouble as it seems to go further down in the corner as it should...

Can i use a body arm rest bases in b body? Car is 68 ht sport satellite. Problem is I have to buy new bases anyway as the chrome paint is too soft to use here and the b body bases dont really have anything to hold on to get door shut with new seals... Thinking it seems that in a body bases you...

Got door glass installed with repro slide felts no problem, they seemed to have correct contour only needed to trim to lenght and punch holes for the plastic slide clips. One tip, if you doing this by yourself and install the glass with window frame already installed in the door, leave the...

Yep is breaking the door glass only option to disassemble? The fuzzy felt slider is really stuck trying to slide glass out, i need the frame.... If i pull any stronger its bound to crack

Im at this part on my resto aswell, has anyone used appropiately thick textile tape as u seal around the glass edge for the front track to save a buck? Will it leak or bind? Did some measuring and in theory it should work.. The felt seals would cost around 220 euro and if the repros dont fit...

Its possible to install everything in with dash installed already but its pain, i did it because I didnt have everything ready at the same time and no room to store dash elsewhere. However if you have big hands or are fatso might not workout this way

Thanks for clarification, thats a real neat frame and suspension you have there also! For older truck cab? Have no clue about that stuff but seems like it should drive like on rails with that frame! My brake set was single piston aswell, but my 68 satellite just has mild built 318 so its not...

Never mind I was being retarded, measured wrong yesterday its direct bolt on.. carry on Easy swap for ppl that wana extra safety for c clip axle, might wana have longer flange studs tho mine were 1-2mm too short

I am doing 3 point conversion for my 68 ht satellite. What i am gonna do is mount the shoulder loop in the corner of door jamb. I didnt want to install it into the roof rail. Picture where it will bolt to: This will require reassembling the retractor and welding the shoulder loop shorter. This...

Hey, Did front disc conversion already, going for rear disc conversion for my 68 b body with early 8.25 27 spline. Has anyone done this before? Seems like it is not as bolt on as it is for jeep guys... I know 68 8.25 was not available, the axle came with the car and the drivetrain was not...

Added 2mm butyl mat and 10mm closed foam type insulation on the roof on my 68. Did brush some epoxy before install. Im pleased with the result dampens any rattles and feels more solid overall. No problem installing bow type headliner. Might want to use black foam without aluminium paper tho, but...

If you want to keep the am radio it might be worth to get an am/fm converter, atleast here where im from there is no am stations... Actually bought original am radio and converter for my plymouth but ended up going with the aftermarket anyways since the am radio will not support enough wattage...

I upgraded my audio system, very pleased with the sound. Got retrosound radio easy to install, motorized retracting antenna was abit harder install but i like it. Got also dsp subwoofer (has built in amplifier) and speaker set, 2 bigher at rear shelf 2 satellite speakers mounted under dash and...

Rockauto has floor carpets and mats

No clue how they did these in the production line in time but its possible to do it by yourself if you take time massaging, im prety hapy with the end result.. finally can start to button up the rest of interior

I did my own paint match with just random spray cans because couldnt get argent in finland.. Used grey wrinkle spray, then aluminum and matt black, skiped black for lighter shade

Getting er done bit by bit, tedious work to glue small portions at time... C pillar abit finnicky to get installed without wrinkles. Snow on the ground here, would imagine this ti be easier job in summer heat