Search results for query: *

Ive got a 73 Charger I’ve had since I was 19, it was my first car, been in the family from the show room floor. Nothing fancy, 318 with bench seats and non ralleye gauges, not flashy but it’s cool. I was thinking about selling it as I haven’t done anything with it in years and it needs some...

Hey guys, I've done some calling around to local parts stores and searched online and have had a hell of a time finding a replacement fuse block for up under by dash for my Charger. My current block is melted and rusting badly. Does anyone happen to know where I can find just the replacement...

Hey there, I had to pull the column out of my 73 charger 318 the other day to replace the starter switch, and so I disconnected what I believe to be the lower column bearing to the shifter tube that is on the steering shaft under the hood. (Apologies ahead of time for calling these components...

Hey guys. So my original problem was that my starter switch on my 73 Charger 318 was bad. Car would crank all day long by turning the key, sometimes it would start, sometimes it wouldn't. You would have to find that "Sweet Spot". However, Car would start every single time if you jumped the...

Hey everybody, I'm looking for more ideas and second opinions on what I can do to improve my chargers starting consistency to make it reliable. It's a 73, with a 318/904. Edelbrock carb and intake. New ECM, plug wires, cleaned plugs, cleaned carb, WD40 in cap to dry it out, new ballast resistor...

Hey there. I have a 73 charger with a 318 and have blown little holes here and there in the radiator and have patched them up pretty well, but just recently it blew again pretty bad. It seems to be right at the seal where the two pieces of copper? come together above the coils. I think Im done...

Hello all. I just purchased a new challenger the other day, so my 73 charger is finally going to take a backseat and just be a fun car, not my everyday driver. I was looking around for insurances but am having a really hard time finding a company that will insure it without having it in a...

Are there any forums similar to forbbodiesonly, but for old Dodge trucks? I have a 78 warlock I'd like to get started on but I'm finding it difficult to get info on it or peoples stories of what theyve done to their trucks to fix them up. Any help is appreciated - Mark

Im looking to buy a good 1973-1974 Small block (318) K frame off of a Charger or Satelite to put into my 73 Charger. Thanks Mark

Hey guys its been a while since I've been on last so its good to finally be back. So Ive been putting some serious miles on my 73 Charger and its beginning to show in the tires. I know I'm supposed to rotate them and I havent, so thats on me, but I noticed today when I did a walk around on...

I was wondering what size tire would work best for the rear tires on a 73 charger. I did a search here and only found a thread for a 68 and a 66 charger, and with different body lines I just wanted to make sure to get the sizing right. I currently have bf goodrich radial t/a's on the front and...

I was just wondering if removing the two torsion bars that run abover the engine in the engine bay will have any negative effect on the car. Thanks

Ive got a quick question on removing the AC clutch from a 73 charger. When I hit the gas the car begins to squel. I tightened the belts all around and it hasnt improved anything, and you can definitly tell its comign from the AC unit. I dont want to go taking things apart without having an idea...

Does anyone here have a Charger or Satellite with bench seats and a 4 speed? Im looking into doing a 4 speed conversion, but really like the idea of keeping the bench Pictures are much appreciated :hello2:

I was wondering if anyone has any recommendations for a set of pistons for my 360. Id like to get around 9.5:1 or 10:1 compression to help maximize HP. Ill be using stock heads with an average of 72 cc. The crushed head gasket will be .04". I was looking into keith black 107's, but the...

Im having trouble getting my holley 4160 600 CFM to work correctly. I just rebuilt it to fix leaking out of the bowls, but now when I turn the car on, fuel begins to start pouring out of the fuel bowl vents. It started to pour out near the secondaries, but now its pouring out near the...

I was wondering if anyone has removed the bumperets from their 73 charger. I just think they look tacky for the car. I also was wondering if someone has before and after pictures of the work. Thanks

I have a 360 engine block that needs to be built to replace the 318 I currently have in my 73 charger. I'm in college so this is a budget build, but I'd still like to get as much as I possibly can out of it. The car has a 904 transmission and an 8 1/4 rear with 2:71 gears. I preferably dont want...

I current have a 318 in my 73 charger and it has factory AC on it. Im building a 360 to swap in there, and Im planning on using parts off the 318 on the 360, but Id like to do away with the AC. Does anyone know what I will need to make the changes? There has got to be a different pulley system...

Hey guys Ive got a quick question about cutting weight in a 73 charger with a small block. As of now the only real weight reduction I have on it is an aluminum intake. I dont really want to change the heads out either for cost reasons. I am planning on taking the original hood off and putting a...