Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would there be any reason I can't mount a distribution block onto the msd 6a box? I'm wanting to redo my wiring under the dash, and I'm thinking of putting the distribution block right on the msd box.
On your gauge lights, get a distribution block and wire each gauge light to each terminal on the distribution block. Then run 1 wire to the fuse box for lights.
I run a old ac delco 1 wire alternator that's rated about 45 amps. Powers my fuel pump, electric fans. And my battery is in the trunk with a battery disconnect switch.
I put my battery in the trunk. I have 2 ground straps that are 8 gauge that goes from the back of the block to firewall. Then a 1 gauge cable from the front of the head to frame. Might be overkill. But it's better to be well grounded.
On my 67 coronet I've been trying to get the bolt for the brake light switch bracket tight. I've tried a 7/16 wobbly and I can't get a good grip on it. Any suggestions would be greatly appreciated.