Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
YES! Polished AL! Wanted Cragars since 1977 in HS but couldn’t afford them or a car to put them on! So now is the time! It was the very first thing I got for the car when I got it. The car was a POS but 5 years later and she’s looking a lot better.
Hey guys I am having the same issue on my 70 Satellite. New roof skin quarters and lost most of my holes. So was a diagram posted of the hole locations? I didn’t see it.
Curious what size drill you guys used? I measured 1/8”.
Do the rear clips sit down in the edge? I know it’s important to...
Thanks so much Charles. I think I am good to go. The hanger location the bracket on the tip and the actual hanger should set the set back on the tips. They will be where they will be. Were these tips welded on?
I am not very smart. I have 3 holes to choose from and no dimensions to work with. But after scraping the 50 years of dirt and undercoating off and what you said and the pictures in the FSM it’s become clear. It looks like its the third set of holes with the slot above. It was so gummed up the...
This is what my FSM has. It’s just not clear which hole is used as there are several and one at least has a threaded nut inside. A few pictures would be very instructive.
I have converted my single exhaust to a duel on my 1970 Sport Satellite. I want to upgrade to factory hangers and exhaust tips. I am not sure about alignment of the exhaust in reference to the frame and how a and where the hangers are located precisely.
Also how far the tail pipes protrude from...
I have converted my single exhaust to a duel on my 1970 Sport Satellite. I want to upgrade to factory hangers and exhaust tips. I am not sure about alignment of the exhaust in reference to the frame and how a and where the hangers are located precisely.
Also how far the tail pipes protrude from...
Ok so I can slide the bracket back to line up the holes but you can see the supports are no longer fully in the slots. Also the automatic trans shifter seems very close to the dash. If I recall correctly this is how it was during disassembly. Something seems compressed?
Thoghts?
Hey guys I am having an issue regarding lining up the bracket to column bolts (4). Seems like the column needs to come back towards the driver about 1/2 inch in order to line up the integrated nuts on the column. See picture.
How do I move the column back or what do you think is going on? The...
Hey guys, I have ordered and received the parts I thought I needed to mount my column but the FSM does not do a great job on the assembly drawing.
I don’t see the star washers washers that I bought . I don’t think they are used?
I know where the nylon safety support inserts are supposed to go...