Search results for query: *

The front two are hard to get at. I pull the rubber stop on the bottom of the door. Lower the glass so you can get at the front lower one. Raise a little so you can see the upper one and you kinda have to get it at an angle. Then raise the glass till the rear ones line up with the holes. You...

Very nice! Whats the plan? Hellcat?

Also there are two side support brackets pictured above that I did not mention.

Remove it as a complete assembly. If you have hidden headlights disconnect the wiring. Support the front center with a floor jack. Remove the two round fender to bumper brackets. Loosen the bumper bolts to the frame rail and pull the bumper assembly forward to clear the rebound bumpers. Remove...

3 years and many miles later since post #3 on the Eastwood Aluma Blast paint. Holding up great.

Yeah, I read Dodge and you Plymouth. Guess he should specify which he has.

72 valance is the same as a 71 so no need to change it. I have both an AMD and a recromed 71 Bumper here and it’s pretty hard to tell them apart. Tri-city charged $1000 to rechrome the one on my 71 last summer.

I stay at the Hampton Inn, Harrisburg West. LOTS of good trailer parking and a fantastic restaurant/brewery across the street. I have also stayed across the street at the Homewood suites which is really nice but it lacks trailer parking.

As long as I have been with Hagerty my policies have been underwritten by Essentia. No Progressive anywhere to be found. As far as the premiums mentioned above, "$478 for 3 vehicles" the coverage and guaranteed value will dictate it. 3 cars at 15k each or 3 at 40k it makes a difference. I have...

Sums up my experience with them too. Been with them 10 years and had a claim earlier this year. They were great to deal with and you can not tell my car ever got hit. Renewal came up a couple weeks ago and they did not raise my rates at all.

I had to grind the outer lip a bit between the 2 and 4 plug for it to work. Same valve covers and gaskets.

I use large needle nose pliers with a rag or tape wrapped around the tips to tighten them down. Worked well for many years.

Don't pay $3000 plus. Ziegler will offer the plan for half that. I have Max care on my 22 Ram for 8 years and the wife's 22 Charger and the cost was less then $1500 each. https://www.zeiglerfordesp.com/warranty_plans/default.aspx?plan_id=2019

Normally under the cowl seal between the wiper motor and master cylinder. Year, plant and sequence number. 1Axxxxxxxx.

This will explain all the options available in 74 for the Satellite line. https://www.hamtramck-historical.com/dealerships/1974PlymouthDealershipDataBook-04.shtml

Kinda hard to understand the post. If the car is $2500 then yeah go for it. But if it's part of a deal with the additional $2500 maybe not. If there is a hole like that in the frame the sheet metal is in worse shape. Hard to judge but the engine compartment pics look like patched rust on the...

Comes from the cowl.

HP2 on a 440 or 383 donates an HP engine assembled on 2nd shift.

I am thinking 2nd shift

Heat riser came apart?