Search results for query: *

That’s what I thought. Nothing else makes sense. Time to order one. Thx

Preface: I’m not an electrical expert… Should this switch always have continuity? I would think only when the rod (button when installed) is pressed in and therefore activates the washer pump. Was doing some random testing and noticed it has continuity when pressed, but randomly (mostly) when...

Ever had a cracked plug in an airplane? I did once about 25 years ago. Cruising along and engine started running rough, a bit intermittently. Almost like a surge. Landed at nearest airport, lucky me was an old strip about 30’ wide (it seemed). No one around. Next nearest was 9 miles away and...

Been a while but I don't recall paying that much. Probably not far off tho. Keep searching Ebay, etc. (that is where I bought mine, I think)

You can check for continuity with an ohm meter. I have a voltage converter (ac to dc) on the bench to check mine. My dash is out and I am rewiring as needed, new switches, etc. 69 super bee with rally dash

You are just getting an education on wiring and charging. We have all learned things by doing it wrong a few times.

Auto Instruments https://autoinstruments.com

Found a decent price on another and bought it, cleaned it tested it and will use it. I have that one as a guide for the other one now, but have not gotten around to putting it back together.

Leaning a bit this way as it looks new, but still original. Thanks for posting

Thank you. I may need to source a 69 first. This was in a box when I bought the car. Funny I just discovered that my ignition switch is a 68 or earlier. I purchased new keys and a cylinder for it and when I got it would not fit After researching a bit I discovered that. I have a 69 on the...

Thanks. I am more interested in keeping the original look. I have had all the gauges etc completely rebuilt at considerable expense along with other things. I want to keep this car as original as possible, some day I do want to do another as a restomod.

Need the entire radio …

My thumb wheel radio for my 69 Bee is way beyond repair, functionally and likely cosmetically too. Pic is posted for illustration. What is the best alternative for replacement? Have perused a couple sites that have aftermarket replacements but would like to hear suggestions and your...

Bought this on Amazon, crimped several with 2 wires into one connector. Not the best made but gets the job done for occasional use. I did buy better connectors off ebay for b body wiring.

Thanks much!

Per the attached pics my wiring harness has a three prong connection that, according to the wiring diagram, goes to the ashtray light. I see nothing on or near my ashtray to hook this to???? Also, on the cigar lighter, I assume there is some type elbow connector to hook to this (single red...

Thanks thanks

What LED’s would be a good (plug and play) replacement for these T53 instrument lights? 69 Super Bee, Rallye Dash TIA

Do these fit in all of the connectors (i have bulkhead covered)? most of mine are corroded and I'd rather just replace. thx

Just ordered this. Wanted to look at the condition of mine first. No brainer. Thanks again for the heads up.