• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. I

    Transmission snap ring???

    Ok guys I have not been able to install the Gear Vendor housing onto the 727 smallblock. Well technically I did once but then i realized that the transmission arm was not properly seated in the housing because it wouldn't shift so I unbolted the housing and attempted again. Unfortunately, I got...
  3. I

    727 Reverse Manual valve body - transmission linkage location

    Hello again, I will attempt to install the gear vendors unit soon onto the 727. It has a reverse manual valve body and the GV instructions say to make sure the transmission is in 1st or L gear. I looked online and can't find an illustration of where the transmission arm would be on a 727...
  4. I

    Transmission and converter install - 2 questions

    Hello all, I am installing a 10" torque converter into a 727 small block. I believe I have fully seated the converter because it sits inside the bellhousing 1.25" (measured this). My first question is, if I pull on the converter it will slide out all the way, is this suppose to happen? For...
  5. I

    Gear Vendors Overdrive Install - Out or in?

    I just received my Cope transmission SB 727 and since the engine and transmission are out of the car I thought it might be easier to install the Gear Vendors to the transmission now rather than when I'm under the car and have much less visibility and space? I've watched some videos online but...
  6. I

    727 transmission lines 90 degree fittings?

    Hi guys, I picked up my John Cope Transmission today from the freight terminal and will unwrap it tomorrow. Thanks for your feedback on making this happen! For anyone that has a transmission or even engine shipped to them you can have it shipped to the local freight company and pick it up...
  8. I

    Transmission help with delivery to commercial address.

    Hi Guys, Another question for you :) The transmission I have ordered from John Cope is ready to ship, yah! However, John tells me I need a commercial address in order for him to ship it to me. I live in a residential house in a suburb just South of Sacramento, (save the...
  9. I

    Dana 60 Differential Gear Capacity?

    I would like to change out the gear oil in my Dana 60. I have not changed the oil since I've had the car (couple of years) and think it would be a good idea to check this off... The Dana 60 has the T/A cover which I think is a bit higher than the stock fill opening. The car does 99% of street...
Back
Top