• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Gary Stavely

    Crower M280H cam from tge 70s

    So I was searching for a old school cam and stumbled upon this cam, snapped it up . I like the new old shool stuff, lol! I am seriously thinking about using though in my 383 build. From the info I can find, it seems it was a good little cam for those who used it, I picked up matching springs...
  2. Gary Stavely

    Lifter and cam questions

    Hello I just have a couple questions about my cam choice, and wether I should swith to 68 and up style pushrods and lifters. after a previous post a couple years ago, I ended up going with the speed pro 2315 nf pistons .040 in my 383. I have the 915 heads but they do only have the 1.6 exhaust...
  3. Gary Stavely

    Forged crank?

    I apologize if this has been discussed before, this is my first big block mopar. Anyways (might be a stupid question) but we're these old forged cranks really this rough looking? I took my engine into a shop quite a while ago and they took it apart. I never really paid attention to it before...
  4. Gary Stavely

    67 A727-B transmission question

    Hello I am going to rebuild my transmission out of my 67 coronet 383 2bl. I am not going to start a thread because there is lots of info on this subject... I have identified the transmission, and the same as the engine I am pretty sure they are both original. In 1967 the 2bbl and 4bbl 383, 727...
  5. Gary Stavely

    TRW L2080F piston info please?

    Hi does anyone have any info on these pistons? I just picked up a set for my 383 with pins but just wondering about rings and the actual specs, if anyone could help me out tha would be awesome. Thank you!
  6. Gary Stavely

    383 build?

    Hi I am getting my 67 383 built and I was trying to get close to a magnum in performance. I have 915 heads but they are 1.6 exhaust valves, I know they are not the best but I think they will be fine for my purpose. I have a 1968 -69 4bbl intake, edelbrock 650 avs2 carb, a melling class 2...
  7. Gary Stavely

    Valve cover identity?

    I am trying to date these valve covers, going to be using a 68 double snorkel air cleaner and just wondering if these will work? Originally I had a 2 barrel 383, I noticed the magnum has valve covers simular but I am just wondering if anyone could could give me a idea of what I got here? They...
  8. Gary Stavely

    1.6 exhaust 383 valve question

    Hi I am looking for some advice on valve springs and retainers for my 915 heads, I have upgraded my cam and will include specs. I was kinda under the impression the 440 heads were the same as the 383 but apparently not... The stem diameter, free length and closed pressures are different between...
  9. Gary Stavely

    Elgin steel valves?

    Hello, anyone want to school me on why I should or shouldn't have bought these for my 66 383 engine? I am doing a mild build , close to stock cam, adding a 4 barrel intake , probably 0.30 over and dual exhaust, my engine has sat for many years all the exhaust valves are toast. Heads are 915's...
  10. Gary Stavely

    440 67 915 heads on a 67 383, stock from factory?

    Hi Today I was kind of curious so I thought I would take a look at casting numbers, engine is seized from sitting so long and I want to see if I can free it up before pulling for a rebuild. Anyways this is a Jan 67 built car and I was wondering if it could have came stock this way?
Back
Top