Search results for query: *

Thanks BeatersRus for your help so far. Well, I purchased a slant six engine and trans from an 83 D150 and, unfortunately, not a super six. And I didn't realize that it was a 727 till I got to working on it a few days later. I know that many B bodies came with 727's so it'll fit. I'm a bit...

Good day folks. I can't find a push button 904 and shifter setup for my 63 Plymouth, so I'm going to buy a used slant six engine with a 904 automatic from an 83 D150. I know I'll have to get the drive shaft modified to fit, and plenty of other mods. I was wondering if I can use a points...

Are the 61 to 65 bolt on flange slant six 904's the same length? Thanks, Wally. I should add that I've found a trans for sale from a 61 that I hope will fit my 63.

Anyone know if a 61 Belvedere slant would have an aluminum 904, or would it be a cast iron automatic? Thanks, Wally.

Hi folks. I'm going to swap out my A903 manual for a 904 automatic. I'm going to have to find a dash bezel for an automatic, but I'd like to know the interchangeability between years and models for the shifter. Anybody know? Thank you.

Hi folks. Is the 2 1/8" plug in the rear of the slant for the cam or for coolant? Thanks.

Hey folks. I can't find brass synchro ings for my A903 anywhere so I'm going to have to reassemble it as is. So what kind of additive can I use to give the old rings a little more friction. I'm running atf now but it's still clashing going from first to second And very hard to downshift from...

Hi folks. Just pulled the trans out of my 63 Savoy because of 2nd gear trouble. It's supposed to be an A903 trans and it looks like it is but the 2-3 synchro is not what it's supposed to be. The A903 and A745 had a ring and pin type synchro. Mine has a regular brass ring type synchro assembly in...

Good day folks. I was going to install a mechanical oil pressure gauge in my Savoy but when I pulled out the old switch I found that the threads are much larger than the later ones, somewhere around 5/8" diameter. Does anyone know the thread and pitch (probably NPT yes?) of these old switches...

Hi all. Looking for info on transmission id. My 63 Savoy has a 3 speed manual in it. I believe it's an A903 but I want to make sure before I order parts for it. Do you know if thrre are numbers on the case that will tell me. Thank you.

Before I drain my trans fluid does anyone know if the speedo cable on these has an inner seal. It seems to be leaking out of the cable above the exhaust. Thanks, Wally

Hello there. My 63 3 spd manual (NP903 I think) needs bearings. My go to supplier, KING-O-MATIC industries can't find them here in Canada or in the USA. Would anyone happen to know the bearing numbers. The trans is still in the car so I can't get the numbers myself. I'd love to drive it for the...

Does anyone know how to rebuild the Column? I could use pics/vids before I dive in which I will be doing in a couple of hours in any case. Thanks in advance, Wally.

Hi again people. My 63 Savoy column shifter gave up on me today. Parked the car yesterday and all was fine, got in today and tried to select reverse and something felt funny. The shifter is no longer moving the shift levers. I realize that I have to remove the column to fix it but it's been...

Hi folks. I want to do an oil change on my 62 Savoy but the parts guys keep telling me I should have a spin on filter. We'll I don't! It's a cartridge! What am I missing here? Maybe someone installed an older engine at one point. Anyway, does anybody know what kind of cartridge would it take...

Hi again folks. Can I tow a 63 Savoy with rear wheels down without removing the drive shaft? It's a manual transmission. Thanks, Wally.