Search results for query: *

OK folks who have been following this thread. I have been trying hard to solve this issue. I checked and replaced my starter with a new mini starter. I replaced my starter solenoid switch. I checked all the connections and made sure they were all clean and tight. It was then mentioned on here to...

What would cause my front light wiring to melt in a matter of seconds? Right down to bare wires for about 2 feet from the headlight and also the side marker light? Key was in the on position. Car would not start in the start position only making a buz at the starter relay. I removed the...

I bought a ready to run for my 383 and was curious about hooking it to the 6AL MSD ignition box and what the advantages of doing this? MSD says the RTR distributor needs no ignition box but they also show a diagram and say the RTR can be used with the ignition box? But they do not clarify why...

does anyone know what the correct bulb I should be using in my 66 Charger front console. Has a lamp on both sides and it is missing the bulbs. Auto parts store sold me 1156 bulbs but they are like 32 watts and seem to be for something much bigger. I don't want to burn the plastic lens with...

Aluminum tag says 3690431. It is purple. Above the part number 38 9.... Does anyone have a date or year application for this distributor. I cannot find it in my book?

Hi, My 383 car I just acquired started and ran fine several times when I got her home. For no reason she died on me. It is set up with a 4 pin electronic orange box and a single ballast resistor. I first took my timing light and hooked it up on a plug wire and turned the engine over. My...