Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone offer a correct mounting hardware kit for the bulge hood inserts? Or know for sure what parts are needed to amalgamate one?
The mounting stud stands on my molding were mostly stripped & missing the fasteners, but these are what I had for the 3 in the center of the insert.
Do...
I see the short bracket advertised as a 71-74 piece, but I've also seen a long bracket horn on an original/survivor car. Can anyone say which one is correct for a 383 non-air grabber car, with AC?
Noob question: I don't see these 2 holes, below the gas pedal mounting holes, on my parts car (72 Satty 4 door) or on pics of other 71 2 door B bodies (71RR here)...before I fill them in, is there any reason the factory may have made them?
The bottom one at least, to me, looks like someone may...
I have a 71 Satellite Custom I'm trying to pull the steering column from. I have everything ready to go except the shaft is still together with the steering box.
Never having messed with this on an old Mopar, I can't tell if the roll pin is still in there or not? It looks like there's a pin but...
Hey all, I just finished installing the driver's side floor pan and plan on converting from bench seat to buckets.
I got the reinforcement plates for buckets marked off today on the new pan so I know where to take it down to metal to weld them in, but the (original?) passenger side didn't have...
I know body panels are out. Anything else that might be useful on a 71-72 RR/GTX/Satty?
dash?
wiring?
radio?
steering wheel/column?
seat belts?
Anything?
Hey all. Never messed with a slap stik before, just picked one up for my project.
This shifter is apparently missing an insert/plug which looks like it would press-fit into the opening in the frame and stabilize the shifter handle?
Can anyone tell me more about this missing piece?
Seems like...
My body guy wanted me to find a different trunk lid for my project 71 RR, to see if we could avoid time-consuming ($$$) rust repair on the inner lip area.
I have a line on a nice 74 trunk lid. Seller says the difference is the key lock. Google says the late deck lid will also not have the...
Guys, I'm working on replacing driver's side floor pans, front & back. Also installing 4 speed hump. First Mopar resto, have a question re: the torsion bar crossmember...
On the section where the hump is, does the torsion bar crossmember get sealed up, or is it left open from the top from the...