Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So....
My 07 Charger R/T shot a P0420 code at me 2 months ago. It has 260,000 miles on it and I've taken obsessive levels of care with it since new. At the time I bought it Chrysler was offering a life time bumper to bumper warranty which I happily purchased.
This car has given so few issues...
It's driving me crazy!!
I can't get rid of the lifter tap on this stupid cam/lifters
I've adjusted lash 5 times (1/2 turn preload past 0 lash) just like Comp specs for the 8921 roller lifters
Cam is a Comp 23-712-9
I've tried it cold, hot, warm, full moon, and 3rd Sunday of the month and nothing...
Pretty sure I know the answer to this but I figured I ask here as well.
I upgraded my engine/transmission from a mild small block with 727 to a beast of a 512 and an A833.
My current driveshaft has 7260 U joints which I'm guessing a way too small. I looked on Dr Diff's site and he has a 3"...
Hi all,
I've seen this discussion a few times but no real answer on how to get the old rusted light sockets out of the housing on my 71 Charger (non R/T).
Since they're swedged in they have to be cut out without damaging the housing which are damn near impossible to find.
I was thinking...
In doing my 4 speed conversion, the one piece I was missing was the clutch safety switch.
The only place I could find one was through Brewers and he was asking $250 if I had a rebuildable core, which I don't.
What I did was buy one of these:
https://www.amazon.com/gp/product/B003C01FFY
All I...
Hi All,
I'm about ready to tear apart my dash so I can get the pad rebuilt. Mines all cracked from 50 years of sun. I know most guys on here like ABCMoparts in AZ but I was hoping to find a reputable company a little closer to home (I'm in NY). I thought I remebered a company in NJ that did it...
I need to replace my trunk floor. I bought a full panel from AMD. The new piece looks like it needs to go under these braces for the bumpers. Has anyone replaced their floor without removing them or should I just go ahead and try to cut all the spot welds and take them out?