Search results for query: *

I bought a Classic Auto Air AC system for the stroked 440 in my '69 Bee. The stock AC belts are too long because the new pump is slightly closer to the alternator. Do you have any advice on getting belts to fit? I asked Classic Auto Air when I bought the system. They said they couldn't tell...

I upgraded to a Lakewood SFI bell housing for my big block stroker. Unfortunately, my stock Z bar doesn't want to mount in the stock location. Anyone experienced with this? Do I need a different Z bar? Thanks.

I have a Quick Fuel 830 for my new big block stroker. I'm looking for a fuel line kit to go from the fuel filter to the carb. It needs to connect in two places on the carb. I'd like a line, rather than braided and flexible. Thanks for any recommendations you have.

I've run into a snag on my current project. I'm putting a stroked 440 in my car. The block is a '75. I bought a Lakewood 15330 series safety bell housing. It came with a block plate. The dowel pins in the back of my block are too short. The plate rests fine on them, but there isn't enough...

The oil sending unit from my '70 440 block doesn't thread into the hole in the block of my mid-70s 440 block that's been stroked. Does anyone make an adapter so I can use my existing sending unit? Or will the correct sending unit for the newer 440 (threaded part is larger and threads are...

I'm doing a lot of work to my '69 Super Bee. One aspect of the current project is to convert the two-speed wiper system to a three-speed system. I bought three-speed parts for the conversion from Jules the Wiper Man. He was highly recommended. Also looks like the work he did is excellent...

I'm looking for some advice. The Super Bee has been out of commission since last November due to a laundry list of stuff that needed to be done and not a lot of free time to do the work. I started the car regularly through April of this year, then had been working on a rear main seal and oil...

I'm thinking about converting my two-speed windshield wiper system in my Super Bee to a three-speed. Can anyone give me an idea on: - What parts I will need to completely convert it? - How cumbersome would this project be / what would it entail? - A good, reliable source(s) to buy the...

Honestly, I'm not sure how to describe what I'm looking for. Do you happen to know of a site or a program where I could see what different styles of wheels looked like on my car? Kind of like a mock up so I could get an idea how good or bad something looked bu uploading a photo of the car...