Search results for query: *

Hi! I have done alot of tuning with my Mopar 493 stroker engine, Edelbrock avs2 800cfm, Edelbrock rpm intale, Edelbrock E-Street heads 84cc, Comp cam xe275hl camshaft(231/237@050), 10,04:1 scr, Fbo distributor set at 18 initial and full manifold vacuum brings it to about 30 at idle, 34 degrees...

Hi! What can be said about these spark plugs, i think they are to cold and wrong for my engine, it is ngk 7 non projected tip. The engine 493 cui stroker scr 10,04:1, edelbrock e street 84cc heads, xe275hl (231/237@050) camshaft, the engine runs great but slight misses on idle, the engine have...

Hi! I have a pretty new built 493 cui stroker engine with about 400 miles on it. The set up is a eagle 4,150" crank, eagle H rods 6,760" , Mahle forged flat top pistons 4,350", Mahle plasma moly metric ring pack file fit, Kings main and rod bearings 0,002" clearance both, Edelbrock e-street 84cc...

Hi! I did a compression test on my 493 stroker engine with about 400 miles on it, 231/237@050 camshaft, 10,04:1 scr, it have stand now for a few mounth during the off season, i just wanted to see what i have. The compression test show 200 psi on all 8 cylinders, i crank it over 5 times on each...

Hi! I checked my 493 cui stroker with a endoscope through the spark plug holes and all 8 cylinders looked nice, it was only in one cylinder i see some black marks, same carbone dust. What can it be? Is it maybe a sharp edge on a ring or something so it builds up little carbon? The engine has go...

Hi! I broken in my camshaft xe275hl in my new built 493cui stroker in July this summer with succes, i use Joe Gibbs break in 10w-30 oil and have shange the oil and cut the K&N oil filter open a few times under the 400 trouble free miles i have on the engine and find no metal or any debris in the...