Search results for query: *

My 66 Coronet 2dr Ht has rust above the left rear wheel opening. The rust goes up about 4" and is about 12" front to rear. Looking for suggestions as to where the best place is to buy patch panels for this area. I know there are several places that sell them, just looking for the best option...

When breaking down the rear suspension, some of the u-bolts broke when we tried to get the nut off so we cut them off. Like an idiot, I threw away the pieces. I need to know what size u-bolts I need for a 66 Coronet 440 2Dr HT, stock parts on the rear end.

My 66 Coronet is dissembled. While I have the rear end out and stripped down, what, besides painting, should I do? Not sure how many bearings, seals, etc is has, so any help will be appreciated. I did find the tag still on it, 2.94. I want it to be virtually trouble free when I put it back...

One of my fenders got ran over and destroyed. I have a 66 Coronet 440 2dr HT. What, if any, fenders will interchange with my car. Found some on ebay for $600 and up, but would like to know what other cars I can look for that have the same fenders.

Did the search thing, came up with nothing. Is there a source for new emblems, such as "Coronet" "V8" "440"? I have a 66 Coronet 440 2dr HT. If you have had one re-chromed, what did it cost? Found the "V-8" on ebay as well as the small Chrysler logo. Are the chrome trims piece that are...

Has anyone used floor pans from "Tamraz"? I found the seller on ebay and they have a complete floor pan for a 66 Coronet listed for $425 shipped to a commercial address. I am wondering about the quality. Just realized that Tamraz is the seller and they sell Goodmark and AMD. The Goodmark is...

66 Coronet 440 2dr HT; Started sandblasting small parts and I have a few questions: 1. What finish is supposed to be on the following parts ex: upper and lower control arms, bars from the front of the control arm toward the core support, torsion bars, 2. Metal brackets on each side of the...

Could not find nothing on the forum, so here goes. I have a 66 Coronet 440 2dr HT. My deck lid is real rusty on the section between the tail lights. What deck lids will fit my car? Is it a 66 only item?

66 Coronet 440 2dr HT. Stripping the inside down completely. I searched the threads for one on removing a steering column, but did not find one. Does anyone know if there is a thread on this already, or can give me instructions on removing the steering column. It has power steering.

What is the purpose of the big spring that is wrapped around the outside of the front brake drum?

Two questions, what is the "torque boxes" for and what would it take and it would it benefit me to install a front sway bar on my 66 Coronet 440/318? It does not currently have a sway bar on it.

Anyone have a good source for E-Brake cables for a 66 Coronet?

I bought a 66 Coronet 2dr HT that is supposed to be matching numbers, I have not verified that yet as I just pulled the motor and trans out today and have not checked the numbers. The car was originally a dark red but I wanted to paint it a bright red. Why you may ask? My wife's dad died when...

What is the process of removing the w/shield and back glass chrome molding? Is there a special tool needed to complete the removal? 66 Coronet

I have a 66 Coronet 440 2Dr HT. The car had been bumped on the left front and a hole was gouged in the bumper and it was bent. I searched the forum before asking. When looking for another bumper, what all models and years will fit? Will a 4dr 66 Coronet fit? Thanks in advance for the help...

How do you tell if the engine in your car is the original engine? I hear so much about "matching numbers", but never knew how to check. I found the fender tag and the VIN plate on my 66 Coronet 440 2dr. Where would the number be on my 318 Poly? Should the number on the block be on the VIN or...

The PO had a set of these wheels in the trunk of the 66 Coronet 440 that I bought recently. Did these come on the 66 Coronet? Where would I find center caps?

1966 Dodge Coronet 440 2dr HT; 318; rust above left 1/4 wheel opening and along edge of trunk, planning a full restoration. Any suggestions for parts vendors will be appreciated.