Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I started my cam break in yesterday but it didn't go quite as planned. It's a 440 with sealed power 6 pack pistons, Edelbrock E street heads 75cc chambers , comp 284 nostalgia purple cam 484 lift and 1.6 PRW rockers. I'm using Edelbrock E street EFI that was previously running great on the...
Hey guy's my plan is to get my new engine and trans mounted in my 73 roadrunner today. The torque converter I ended up purchasing uses a 7/16 bolt which is fine because the Flex Plate I have accepts either size. The problem I'm running into is the ARP Torque Converter bolts I had originally...
I ended up buying a set of PRW 1.6 steel roller rockers. I went ahead and got the rockers setup and shimmed so they are centered over the valve tips. I also kept the side clearance that the instructions called for of between 0.0015 and 0.0020. I used a .0015 feeler gauge to check this but was...
So I'm replacing my pinion seal on my 489 sure grip rear as well as the yoke as I discovered a crack in one of the bolt holes. My question is has anyone done this and did you have to remove everything from inside the chunk to get the old crush sleeve out? I pulled the pinion nut, yoke and...
I'm trying to figure out what torque converter to use. If anyone knows a good vendor who can point me in the right direction that would be great. I have a 73 roadrunner 440 at I believe 10.47:1 compression ratio, Edelbrock E street EFI, Comp 284H cam .484-int .484-ex l08 lobe separation, My rear...
Hey guy's I'm in the process of finishing up my 440 engine build so I can get it installed soon and I have a question about rocker arm's. I'm trying to figure out what I should do for rocker arms for my specific build. My engine is bored .30 over with Speed Pro six pack pistons L-2355F .020 in...
I'll be swapping my 440 into my 73 Roadrunner this spring. I was thinking about going 4 speed but a mopar buddy of mine talked me into just staying auto as I got a trans with the 440 I rebuilt. He said you just can't beat a crisp shifting auto lol and also think about what else you can spend...
Has anyone ordered a 4 speed swap from Brewer's Performance? I'm going to be finally putting my new 440 into my 73 Roadrunner this year. It's been one thing after another and I've put it off for several years. I was originally going to go 727 as I got one with my 440 but I would probably have...