Search results for query: *

ok, ever since I've owned this car, the clock won't run but the tac works fine. Today I pulled the cluster out, removed the tic toc tac, bench tested it with a hot 12v to the clock. It wouldn't run until I attached a ground to the outside casing and voila, tic toc starts tic tocking. (...

Ok this is driving me nuts. Actually the wife thinks I'm already there, but......... my '70 GTX has a pentastar emblem on the passenger side front fender, but not on the driver's side. Is this correct? I have looked at hundreds of pictures of '70 B body Plymouths and cannot find one with the...

Can someone post a pic or 2 of the inside of the console lid showing the proper orientation of the hinge and the curved ends of the hinge pin. ('70 GTX woodgrain console) I took mine all apart to clean polish and re-align it and can't seem to get put back properly. I've already called myself...

Hi guys, I'm seriously considering going to a 6 barrel setup on my 440. It's currently a bone stock 440 4 barrel, automatic, 3.55 rear gear, stock exhaust manifolds and heads. The only warm up is a Comp Cams. 21-670 hydraulic , duration 280 intake, 287 exhaust, .474 lift exhaust and intake...

Hey Guys, Can some one post a pic of their power steering pump which would be the correct pump for a 1970 440, The one on my car has the small fluid cooler attached but my suspicions are that this pump is for a small block. It works fine but may not be correct. Thanks...

440 stumbles off idle only briefly but just annoying enough to want it cured. Fuel octane rating makes no difference. Engine is fairly fresh, about 5000 miles since rebuild. Retains stock bore and stroke. 1970 440 stock manifold with edelbrock performer 1407 carb stock exhaust manifolds Comp...