Search results for query: *

Working on an 8 3/4 rear for a guy. Trying to remove the axle seals. They will not move. I ended up breaking my seal puller. I took a slide hammer that i have & made a hook for it but no go. Anyone ever have the same problem ?

Is there a site i can get on to that would give me a list of chassis parts and what colors they were from factory ? Also what colors was the hardware.

On a 68 coronet what do you think is the weight of the door glass & mechanism ?

My uncle bought these some time ago in Carlisle he was told they are for a 71 GTX They are not Now I have them I have no idea what they are for. Anyone have any ideas

If you are going or thinking of buying a car & if all possible go look at. Do not go by pictures if you can. Pictures hide a lot bad & good body work.

Has anyone put sound deadening on there floor ? Did it make a difference ? I got a chance to buy some DYNO MAT brand at a good price & wandered if it is going to be worth it.

I am replacing the wiper motor on the 67 GTX. Installing the motor is easy. Hooking it up under the dash is getting to be a pain in the *** Couldn't get the linkage hooked up to the motor. So had a brilliant idea of taking the linkage/ cam apart then hooking it up to the motor. Well lost the...

Any sites to go on to ID bumper jacks ? No numbers on the jack its self but numbers on the hooks. got 2 #2533 424 then below them # 93153 the other one is #2461 129 then below them WI Also have 1 with just the number 69 on it

I have a 67 GTX Factory console tach. My dad bought & installed a updated new circuit board in the tach. After I got the car I put in all new MSD dist. coil & box. The tach board instruction said all I have to do is take the tach coil wire & the MSD tach wire & splice them together. Great ...

I am thinking of putting in aftermarket gauges in the 67 gtx. Who has an aftermarket water temp gauge & where on the engine did you install it ? 440 engine I want to keep the heater hoses.

Are they all the same or does it depend on the year, engine, exhaust manifolds ?

Got a 4spd trany that's been sitting my dads shed for a long time. Selling a bunch of parts. The trany is out of a 65 B body. Is it worth any thing ?

Anyone know who or where I can get a build sheet made for my dads 67 gtx ?

Has anyone with a b body manual, front drum brake car change it to a front & rear disk ? Did you keep the original master cylinder ? What for brake valve did you use ? Did you use an adjustable brake valve ?

On my dad 68 GTX the fuel &temp gauges don't work. Now some time ago I changed the fuel flout & then the fuel gauge worked. Now this year it doesn't. When you turn the key on it moves up to the first line & stops. There is over 5 gals. of gas in it. I tested the gauge by grounding it & works...

This air cleaner has been on my dads 68 gtx for as long as I can remember. I know its not right for it. Does anyone know what its for ? Would anyone want to trade it for an original 68 440 gtx air cleaner ? Less the pie tin

Along with the gear oil what additive do you guys put in your rear ends ? Any sure grip additives.

Hopefully soon I will be getting back to working on my dads 62 polara. I have been looking for air cleaner assemblies for his max wedge. I only found them at Mancini racing. They want $400 for everything. Anyone know where to get a better deal if there is one ?

Working on my dads 62 polara & I noticed a vibration when I would start it. So I took the drive shaft & got it balanced. The guy said it was out but not that bad. I put it back in & the vibration is still there. I checked every thing. The rear that's in the 62 is out of my dads 67 gtx. We drove...

Hi, this is Wayne again XMANs son. Before he got hospitalized we were in the proses in get his 62 ploara 500 max wedge done. I would love to get it done for him. I took the bolt on drive shaft to a place where we get all our shafts balanced. They said they cant balance it. Anyone have any ideas...