Search results for query: *

Hello everyone need a little help I just purchased aluminum wheels for my 67 unfortunately I need longer wheel studs at least 1/2 longer than stock my fronts are the original 4 piston disk brake set up and the rears are 8 3/4 what is everyone using thanks

Hello everyone I was wondering if it were possible to find out the vehicle from the last 8 of the vin I have a 69 383 I was wondering were it came from thanks in advance 9d269604

Hello everyone I was thinking about purchasing the Sniper set up please share your stories how do you like it better then old fashioned carburetor

Hi guys I finally got my car on the road after 22 years of sitting in the garage and then a 4 year me myself and I resto still not done no side glass fresh 440 larger cam bigger valves pocket port Intake etc what kind of numbers you guys getting for fuel consumption notice I did not say economy...

Hello everyone I installed an Indy dual plane intake and now the original air filter assembly will not fit way too high what have you guys been doing out there with taller intakes would like to use the original for the sleeper effect I was looking at a drop base and putting the dual snorkel over...

Hi everyone saw an article on the internet was wondering if anyone installed one do you like it and can you tell the difference in the steering system firm feel sells them seems like a good idea just wanted to know if it really made a difference thanks

Hi everyone my first 440 build looking for some help with Isky rockers unfortunately I leaped before I looked I purchased billet hold downs and I am now learning that the factory hold downs needed to be modified for proper fitment the billet ones are the same width as factory. I have noticed if...

Hi I will be running a mechanical flat tappet cam and old school Isky ductile iron rockers having a hard time choosing a rocker shaft need some help I am interested in the Mancini hardened chrome the mopar performance p4529101 and the comp 1077 anyone out there use any of these with success thanks

Hi everyone I am about to pull the trigger on a center section I have decided to build from scratch. Which center section is better the Doctor diff or yukon power lok this will be for a 742 case thanks

Hi everyone what spark plugs are you running in your mild 440's stock or something different thanks

Hi everyone has anyone ditched the springs for solid spacers On the Isky adjustable iron rockers if so what size did you use thanks

Hi everyone I am finally building the 440 need to know what length push rod to use. Here is the set up mechanical flat tappet cam old school isky rockers 915 heads felpro head gaskets I was going with the 9.250 but I was told I should use 9.300 I wanted to know what you guys are running and...

Hello everyone I am restoring a 67 GTX my heat riser needs some help what is everyone out there doing. it will be a very nice driver when done do I bother with this detail I am trying to put this back together as close as possible thanks

Hi everyone in the middle of resto on a 67 GTX preparing to strip prime and paint interior floor Automatic console car need to know where a spring goes to that I have found on the brake pedal support there are 2 small slots on the top that the spring fits in and it was dangling I do not see...

Hi guys I am looking to get the correct date code intake for my 67 GTX the original is long gone how close to the scheduled delivery date should it be thanks