Search results for query: *

Been messing with a Hot Rod with MSD Atomic FI. Got it dialed in pretty good and gave it back to the owner about 2 weeks ago. He was happy with it said it never has run so good. Well he brought it back and said it was stalling popping ect. Found the positive side of the coil wires loose as the...

Just completed this upgrade and Man what a difference. Took all the load off the switch cept for the trigger ckt. Used a E-bay kit just be sure to check the crimps as I had 1 that was sketchy. Now to aim them tonight.

just got done with the HEI conversion. Went from a GM 990 module and an older oil filled coil to a Pertronics 60103 coil and Accel 35361 module. Now the tach bounces what am I missing?

Howdy folks, I got a Dist adaptor to put a 440 unit in a low deck. There is no O ring on it. How should I seal it? RTV or ? Got it from 440 source.

Howdy folks, I just converted my BB from points to a Mopar style conversion. Ran fine with the points but I had the EI laying around so I wired it up and slammed it home. BTW this is one of Boggers Hi Rev 7500 units. So No spark is the issue. I used a jumper from the starter sol post to the run...

Needless to say the quality of bulbs is in the toilet. The good old 1157s that are used on just about everything are now made in China in a Sylvania box. I had 2 NEW ones burn out in a few days. So I was at the Portland swap meet and picked up bulbs where I could find the, new in box of course...

Had to get towed yesterday after pulling into a store to get suds. Come out and tried to start and got the old Click Click. Tried jumping, smacking starter with a SFH ect. Figured its gonna need a starter and was not looking foward to changing it with hedders. Hagerty tow to the house for free...