Search results for query: *

ok I’m running out of ideas. I really don’t know my way around a carb especially one like my quickfuel 880 with 4 corner idle and stuff. So I’m hoping one of y’all can help guide me in the right direction otherwise only other option I can think of is taking it to the dyno shop and paying them...

I'm sure this is a stupid question but what am I doing wrong. The sights are completely full. I turned the screw alittle and loosen the nut and the fuel level started to drop and stayed in the middle so I left the nut at that position and tightened the screw down. Started it up and fuel shot up...

So I found out the cam in my 498 is only going to make about 8in of vacuum at 1000rpm I am now worried because that is not going to be enough to run a vacuum secondary carb? I was planning on buying http://www.jegs.com/i/Demon+Carburetion/333/1563010VE/10002/-1 (demon 850). If it doesn't make...

Hey guys, So i was at auto zone earlier with my dad and i usually don't go down the isle with the stick on chrome molding,ricer crap and gauges but i decided too. I saw they had an air to fuel ratio gauge that caught my eye, i asked the guy there he told me i could make it work but recommended...

Hey guys I cleaned my carb the other day and since then it's ran like crap. I'm sure it's because the old tune was for a dirty carb and now that it's clean it needs tuned again. I've never tuned a carb besides adjusting mine a tad here and there, So I was wondering if anyone could give me any...