WTB 15 Year old son building an A12 Clone 1969 B Body needs a Big Block Bell Housing

[BigBrother]

I was 15 once....has dreams of a car. My son has wanted an A12 B5 Blue SuperBee since he was 9. We helped him buy a Decent Coronet
Body, He has the A833 trans he bought and is rebuilding himself. Can anyone help us find a Bell Housing, Cover? Shifter? Clutch and Flywheel?

 

[super-bee_ski]

Have you searched the For Sale Forums here on the site?

BTW: Welcome aboard!
Thanks for joining the forum.

 

[Rick@Laysons]

Most of the components you are needing depend on the size of the flywheel you end up using.

You cannot just mix and match parts for these pieces.

The bellhousing will depend on the flywheel used, or vice-versa... Then the clutch and pressure plate will have to match the flywheel. Also need to consider the diameter of the front bearing retainer to source a bellhousing that'll work with the tranny...

Best to do a little research before you plunk any money down.

IF....you could find a donor car with all of these components present, and get a "package deal", that might be a good way to go.

 

[Bb70charger500]

Try
Elite vintage auto
There in N.j.
845-742-0571
Elitevintageauto@Yahoo.com
They took care of me great people that know there stuff and what all is needed for the 4 speeds. They sell parts recon and used .good luck

- - - Updated - - -

Forgot to add they were very helpfull with what parts I needed (correct fit) I'm running a 72 340 witch depending on when it was built apparently has two different cranks a forged and non forged ,so he made shure we were getting the correct flywheel ,also I price searched and he was ether right on some were a little over and some were under ,I bought a full 4 speed conversion kit from him and overall he was cheaper