WTB 1963 Dodge B-Body Rear Bumper Gas Nozzle Filler Shield

[VANDAN]

I'm looking for the Shield under the filler nozzle, on the '63 Dodge 330, 440, Polara, assuming they are all the same. Mine was sent out for re-plating, and never made it back, as of today. Need a quality piece, to re-finish, or longshot is NOS. Thanks for any leads on this...

 

[Lee Robinson]

I'm looking for the Shield under the filler nozzle, on the '63 Dodge 330, 440, Polara, assuming they are all the same. Mine was sent out for re-plating, and never made it back, as of today. Need a quality piece, to re-finish, or longshot is NOS. Thanks for any leads on this...

View attachment 1335474View attachment 1335475

I have this one from a 64 Polara. dimensions 17 1/8" X 3 3/4" Don't know if it is the same.

 

[Pepe70]

I have the 3 pieces let me know if you still need it

 

[VANDAN]

I have this one from a 64 Polara. dimensions 17 1/8" X 3 3/4" Don't know if it is the same.

View attachment 1335569

Lee, I'll check dimensions on that tomorrow, Thanks...

 

[Pepe70]

Is any other car that use the same moldings o only 63 and 64 polara?

 

[Part Stalker]

I think 63 is different than the 64/65. 63 on the left and 64/65 on the right. 63 is a little over 5 inches wide.

 

[VANDAN]

I think 63 is different than the 64/65. 63 on the left and 64/65 on the right. 63 is a little over 5 inches wide.
View attachment 1335892

Thanks PS, I only have a '65 currently to compare with. I'll check those pics later.
I know the bumpers are quite different on these years.

 

[VANDAN]

If anyone can verify Part Stalker's specs on these pieces, it would be helpful. Thanks...

 

[VANDAN]

NOS anyone ???

 

[VANDAN]

I have this one from a 64 Polara. dimensions 17 1/8" X 3 3/4" Don't know if it is the same.

View attachment 1335569

Lee, I think the 64 is different than the 63, but the same as the 65. Tough sorting this out, without the pieces in front of you to compare. Thanks for offering that one up though !

 

[Lee Robinson]

Lee, I think the 64 is different than the 63, but the same as the 65. Tough sorting this out, without the pieces in front of you to compare. Thanks for offering that one up though !

Thanks for the info on that part.

 

[VANDAN]

I have a used one on the way, but would still be interested in a NOS piece, if any are around, Thanks...

 

[VANDAN]

Thanks goes out to Parts Stalker for the piece He provided. I will re-hab this one, but interested in a NOS, or VGC if there are any out there, Thanks...