skicker
Well-Known Member
- Local time
- 3:36 AM
- Joined
- Dec 15, 2011
- Messages
- 1,461
- Reaction score
- 3,736
- Location
- Cumberland, Maryland
Found a few pics taken at the Western Maryland Street Rod Round-up Labor Day weekend...
1965 Coronet AWB Build
- Thread starter skicker
- Start date
skicker
Well-Known Member
- Local time
- 3:36 AM
- Joined
- Dec 15, 2011
- Messages
- 1,461
- Reaction score
- 3,736
- Location
- Cumberland, Maryland
This has been in the works for a couple weeks or so...wasn't sure it was going to work out...
Dave6T4
Well-Known Member
- Local time
- 3:36 AM
- Joined
- Dec 31, 2020
- Messages
- 9,301
- Reaction score
- 22,388
- Location
- Ontario, Canada
Here's one my friend bought this summer. A very nice build with a good paint job. Straight axle and 2 X 4 barrel 440.
skicker
Well-Known Member
- Local time
- 3:36 AM
- Joined
- Dec 15, 2011
- Messages
- 1,461
- Reaction score
- 3,736
- Location
- Cumberland, Maryland
Ran to a few shows over the last couple weeks and managed to empty the 4th fuel barrel...
Not getting another this late in the season so I guess I'm pretty well done for the year...
I am going to blow a couple things apart over the winter and make a few changes...
Not getting another this late in the season so I guess I'm pretty well done for the year...
I am going to blow a couple things apart over the winter and make a few changes...
skicker
Well-Known Member
- Local time
- 3:36 AM
- Joined
- Dec 15, 2011
- Messages
- 1,461
- Reaction score
- 3,736
- Location
- Cumberland, Maryland
Nothing really new to report...
Plans are to remove the headers and send them out for sandblasting and paint...
I'm going to remove the valve covers and rockers and look everything over and re set the valves...
I also think I'm going to take the distributor out and soften up the springs and visit what the curve is...
Clean everything up a little and get it ready for another year...
I haven't done anything as of yet...
I'm trying to get the inside of my garage finished...heated and all my tools and things moved in there...
That's still going to take a while...
New Garage
Plans are to remove the headers and send them out for sandblasting and paint...
I'm going to remove the valve covers and rockers and look everything over and re set the valves...
I also think I'm going to take the distributor out and soften up the springs and visit what the curve is...
Clean everything up a little and get it ready for another year...
I haven't done anything as of yet...
I'm trying to get the inside of my garage finished...heated and all my tools and things moved in there...
That's still going to take a while...
New Garage
Similar threads
