1966 b body interchange?

[Cornelius]

Is there any list of what years/cars I can grab parts from for my 66 coronet?

I want to do a big block swap and found a 64 K frame, and was curious if it will fit. Also if any year 727 transmission will fit.

Is any b body part interchangeable for the most part?

Thanks.

 

[YY1]

Don't need to swap K frames unless you have a slant six.

Some 68-70 body and interior stuff works.

Heck lots of fasteners are the same all the way into the 90's!

You'll have to be more specific about direct interchange.

 

[Cornelius]

It's a 2 door, automatic, hard top, slant six car. I want to put a 440/727 in it. Do I need a kframe swap or just the motor mounts that will fit a big block into the slant six k frame?

 

[motorhead55]

Try schumacher motor mounts they should have what you need.

 

[Cornelius]

Try schumacher motor mounts they should have what you need.

I know about those mounts, but would there be any benefit of using a big block k frame instead of the schumacher motor mounts??

 

[moparmarks]

64 K will sit the motor back abit. You just need a V-8 K-frame. I have them for 66/7B for 75.00 plus shipping

 

[terzmo]

64 K will sit the motor back abit. You just need a V-8 K-frame. I have them for 66/7B for 75.00 plus shipping

that's a good deal

 

[Gpuller]

You'll want a '66 or newer 727, the '65 and older 727's were cable operated for the push buttons.

 

[Donny]

1966 B Bodies can provide stuff for the 69ish years, my GTX entire front clip is from a 66 Coronet, couple small changes needed to be made, but, overall exacto!