• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1966 Plymouth Hemi Belvedere 1

Status
Not open for further replies.

68blackbee

Well-Known Member
Local time
5:07 AM
Joined
May 8, 2021
Messages
59
Reaction score
36
Location
new jersey
Feedback: 0 / 0 / 0
Contact seller
1966 Hemi Belvedere 1 project car..original 426 hemi,4 speed car. one of 57 built. ex drag car, never tubbed or caged,No motor(blown up years ago),has original,radiator,4 speed and dana 60. has vin tag, fender tag, build sheet and warranty card.body numbers match..One owner car..K frame was changed at some point. has rust in front floors and Ds framerail but easy fix. has seats but needs to be recovered. have grille,nos side moldings for it. Needs full restoration or make a cool patina hot rod. 15K obo. located in NJ.

PS. if it doesn't sell i would be looking for a 66 Hemi engine and parts to rebuild this rare beast!
279573945_5671263902887845_6203581913091640292_n-2.jpg
279593731_5671263892887846_5087978032388528217_n-2.jpg
279623784_5671263909554511_4457627029647091678_n.jpg
279638782_5671263896221179_6572096684478754245_n.jpg
View attachment 1285946
279603331_5671263906221178_3262012102010167578_n-2.jpg
 
Last edited:
frame rail and floor rust has been repaired. looking at a 66 hemi for it. might just keep it and make it drivable.
 
Last edited:
purchased a bunch of parts for it, Hood,rs fender and door,trunklid,grille,bezels,bumpers,original wheels. price is now 16K..
Also, located a complete 426 hemi air cleaner to oil pan available for 17K.

thumbnail_7E52EF5B-0871-414B-8441-B497A41856D2.jpg


thumbnail_8DAD8BD3-A6A0-403E-86BE-A87C4E4AD956.jpg


thumbnail_90722441-63FB-45D6-B713-4F36E65CA7B2.jpg


thumbnail_250010B8-0D36-4A08-AF66-2DE1F1BF774C.jpg


thumbnail_70FA5450-1860-4414-BA99-F57687DFE256.jpg


thumbnail_EC60D0AD-A12B-437C-A0B2-4A6288673FBC.jpg
 
Can you post pictures of the Hemi and what year did it come out of? Is it running?
 
somebody had a vision! my 66 had the rear wells cut like that with L60-15"s and the stance set with just enough clearance so no scrubbing,car looked great and hooked good enough to pull the front wheels in second with 3.91's in the dana. and 90/10 shocks on the front!
 
Can you post pictures of the Hemi and what year did it come out of? Is it running?
1967 motor,it is not currently running heads are off for inspection. I plan on assembling and get running on my engine stand.
 
just acquired a correct hemi k frame.price adjustment 17K as a roller..I now have everything to assemble car but a driveshaft.I Disassembled the 426 hemi engine to inspect it..looks very clean inside appears to be rebuilt,good cylinders, standard bore, standard crank..stock compression pistons, racer brown camshaft. Will inspect heads, cleanup and reassemble..Disassmbled original 4 spd trans and looks very nice inside..gummed up from sitting, cleaned it up, resealed and assembled. ready to go.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top