• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1966 Satellite CONVERTIBLE rear arm rest panels

Status
Not open for further replies.

Racheldog

Member
Local time
3:42 PM
Joined
Jun 13, 2019
Messages
19
Reaction score
19
Location
Ohio
At some point in time in my 1966 Convertible Satellite's lifetime, 4 inch round speakers were installed in the rear seat plastic walls by cutting a hole just above the armrest in the back seat, on both sides. I want to return the panels to original if possible. I have looked for a replacement panel, but have not found any manufactures of that specific piece. Doubt I will find a used pair to replace that panel, so I am looking for suggestions on new, used or repair of the two holes. Last choice is to put speakers back in the holes and call it a day, but will listen to any suggestions the forum may have.

Thanks!
 
I know someone who may have some nice used original pieces
 
At some point in time in my 1966 Convertible Satellite's lifetime, 4 inch round speakers were installed in the rear seat plastic walls by cutting a hole just above the armrest in the back seat, on both sides. I want to return the panels to original if possible. I have looked for a replacement panel, but have not found any manufactures of that specific piece. Doubt I will find a used pair to replace that panel, so I am looking for suggestions on new, used or repair of the two holes. Last choice is to put speakers back in the holes and call it a day, but will listen to any suggestions the forum may have.

Thanks!
Have you tried a parts wanted thread. If not, try it. You never know what you may find., You asked about new or used in your original post. That is a wanted thread except none of the sale rules were followed. This thread is closed.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top