Twalker
Well-Known Member
- Local time
- 11:01 AM
- Joined
- Jul 15, 2017
- Messages
- 330
- Reaction score
- 603
- Location
- Nova Scotia, Canada
Good morning folks, working on cleaning and testing my harnesses for my restoration and came across this strange issue. The only explanation I can think of is an error in the manual- but find that hard to believe.
see photo and mark up. It seems the left park and turn signal lamp connector has the wires reversed- clearly not something someone has done as a modification - the molded connector is just backwards relative to the wiring diagram. Right side checks out. When I tested the wires for the left side everything matches the reverse of the wiring diagram.
maybe it’s early and I am missing something obvious. Anyone have any thoughts?
see photo and mark up. It seems the left park and turn signal lamp connector has the wires reversed- clearly not something someone has done as a modification - the molded connector is just backwards relative to the wiring diagram. Right side checks out. When I tested the wires for the left side everything matches the reverse of the wiring diagram.
maybe it’s early and I am missing something obvious. Anyone have any thoughts?