Burnout68
Well-Known Member
My pops has a 67 charger he wants to drop in a RV 383 & 727 he picked up cheap
Charger currently has a 318.
pulled valve covers on the RV motor and has 906 heads.
From what i researched oil pans & exhaust manifolds and also he would like to change intake from 2 to 4 barrel
Would that be a simple change since they are 906 heads( read some rv motors have heads with extra cooling passages) I know tail shaft and out put shaft will need to be switched on the 727.
Anyone have any info or specs on the 1968 383 RV motor not much info in them mostly see upper 70’s rv’s getting stripped.thank you in advance!
Charger currently has a 318.
pulled valve covers on the RV motor and has 906 heads.
From what i researched oil pans & exhaust manifolds and also he would like to change intake from 2 to 4 barrel
Would that be a simple change since they are 906 heads( read some rv motors have heads with extra cooling passages) I know tail shaft and out put shaft will need to be switched on the 727.
Anyone have any info or specs on the 1968 383 RV motor not much info in them mostly see upper 70’s rv’s getting stripped.thank you in advance!