WTB 1968 Superbee trunk floor

[topmill]

Hey guys well still working on converting my Superbee race car into a mad street car. So I pulled the fuel cell out and now I have a big hole in the trunk. I need a center section of the trunk. Its about 2'X2'. Please no rust. I can buy a whole trunk floor for about $250 but just don't need the whole pan. I can send the exact section that's needed if you have a clean piece.
Thanks

 

[hunt2elk]

Unfortunately the piece you need is also the part most prone to rust and wont be easy to find from a donor car.

 

[themechanic]

You're in luck. Just cut and weld in what you need or replace the whole pan.

http://www.forbbodiesonly.com/moparforum/showthread.php?82982-Hot-Hot-Hot

 

[topmill]

Thanks will keep this new pan in mind if nothing else come up.

 

[topmill]

here is the section I'm looking for

 

[topmill]

Never mind made my own for about $10.00...DIY baby. If you didn't know the ribs were supposed to be there you would think it came that way.

- - - Updated - - -

Oh by the way this is how it started.

 

[themechanic]

Nice job. Throw a mat over it and no one will be the wiser.