• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1970 383 engine/heads

Status
Not open for further replies.

NTOLERANCE

Well-Known Member
Local time
10:48 AM
Joined
Apr 25, 2009
Messages
80
Reaction score
27
Location
Madison, WI
Feedback: 1 / 0 / 0
Contact seller
70 383 engine.

$1200

This is a low mileage engine that I ringed and bearinged some time ago. It was a runner when I got it. Planned to use it in my 65 but went another direction. Bore taper was in spec. Original bearings were pretty nice. The stock heads were removed and a set of fresh 346 castings with viton seals and new valves were added.
The springs and retainers are not something I would use, but I have set mp 077 springs and retainers to include. Also have a few other odds n ends to include.
I installed new cam bearings but I'm not happy with the results. I used a cutter cam and they look rough, but a new cam turned fine. I believe I have another set i can include.
I have a deep sump oil pan and pick up, timing cover, Erson hyd cam and I'm sure some other stuff I will include.

I've kept it coated with fluid film, and kept it bagged but have moved a couple of times so I would clean it before use.

Will trade for Mopar 65-70 b body 8 3/4 sure grip rear end, gen 3 hemi or similar condition 360

Located in Stoughton Wisconsin

Screenshot_20221009-222850.png
.
Screenshot_20221009-222855.png
Screenshot_20221009-222858.png





Screenshot_20221009-222850.png
Screenshot_20221009-222855.png
Screenshot_20221009-222858.png


Screenshot_20221009-222902.png
Screenshot_20221009-222905.png
 
Last edited:
Does it have the ID # on the side rail pad ?
 
70 383 engine.

$1200

This is a low mileage engine that I ringed and bearinged some time ago. It was a runner when I got it. Planned to use it in my 65 but went another direction. Bore taper was in spec. Original bearings were pretty nice. The stock heads were removed and a set of fresh 346 castings with viton seals and new valves were added.
The springs and retainers are not something I would use, but I have set mp 077 springs and retainers to include. Also have a few other odds n ends to include.
I installed new cam bearings but I'm not happy with the results. I used a cutter cam and they look rough, but a new cam turned fine. I believe I have another set i can include.
I have a deep sump oil pan and pick up, timing cover, Erson hyd cam and I'm sure some other stuff I will include.

I've kept it coated with fluid film, and kept it bagged but have moved a couple of times so I would clean it before use.

Will trade for Mopar 65-70 b body 8 3/4 sure grip rear end, gen 3 hemi or similar condition 360

Located in Stoughton Wisconsin

View attachment 1355494 .View attachment 1355495View attachment 1355497




View attachment 1355494 View attachment 1355495View attachment 1355497

View attachment 1355498 View attachment 1355499
What is the Vin Number Please?
 
Hello
is this still available?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top