• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1970 Charger Center Console Missing Piece Help

70383ChargerSE

Well-Known Member
Local time
10:23 PM
Joined
Sep 2, 2018
Messages
69
Reaction score
66
Location
SF Bay Area
Hello,

I have a center console in my 70 Charger and I think I am missing a piece. Is there something that connects the rear bezel on the top to the back of the console? Is it just the 2 screws on the bottom?

If I am missing something, any idea where I can buy thr correct stuff. This is for an automatic console.

Here are a few photos of what I have.

Thank you

20260206_152113.jpg


20260206_152842.jpg


20260206_152509.jpg
 
Isn't there two drilled and tapped holes on the rear cap? As I recall two tabs screw on to it.
 
If you get some ABS, possibly from an old kick panel. You can cut some pieces for repair. Put some small shavings or tiny pieces in an airtight jar. Add some acetone or nail polish remover and make glue. You can then make reinforcement pieces for the top of the console. You can pretty well make that crack invisible. Make whatever else you need. I have done some.
 
Hello,

I have a center console in my 70 Charger and I think I am missing a piece. Is there something that connects the rear bezel on the top to the back of the console? Is it just the 2 screws on the bottom?

If I am missing something, any idea where I can buy thr correct stuff. This is for an automatic console.

Here are a few photos of what I have.

Thank you

View attachment 1990769

View attachment 1990770

View attachment 1990771
These are the two tabs held on to the console end cap.

Screenshot 2026-02-07 182828.png
 
Back
Top