1970 rear quarter regulator question

[Wcotner96]

So, is there supposed to be a roller on the spot in blue circle? These are not mine but the ones in my car also do not have the roller here and they operate up and down but the window doesn’t go into place(up) without guiding it by hand.

 

[1 Wild R/T]

You need one of these..
https://www.ebay.com/itm/297921766023?_skw=Mopar+69+B+body+window+roller&itmmeta=01KFMMD2JMRAJ414069SPC1C63&hash=item455d856287:g:KQYAAeSwIURpYSG5&itmprp=enc:AQALAAABAO7PUuNWmJ++UShgI9tQz/pOiAPdt9tBGwoOOjPxYvP5gikI0QoAoqTvtk1wEh+ri+JKD4cJlIJKkDwQVdZeWxmuGpEsQuzgbeJQ/0G/5rpwV0Mru9edx4CF0fBHX6Jma7Aj1+iAei2SRMwcEtaqJqj53Vp+VbNoPKm+uEEm2mIVIFBLHlzHbGNSHei0X37JgtM0RhwUScb+pGX1mcwEnSwe8Hej/aQv2asLAxxq8mYyAn6UyHyQdl+wXMOF9mtHjdkUkMCPkDtGGg4i2MAAiwwK7pDdGg6bN7TwhooBMErkkwJ7HfNYWa/JzCKFk0I13tgOYueiWOyjXyOoT2mnerg=|tkp:Bk9SR-KptJT9Zg

 

[Wcotner96]

You need one of these..
https://www.ebay.com/itm/297921766023?_skw=Mopar+69+B+body+window+roller&itmmeta=01KFMMD2JMRAJ414069SPC1C63&hash=item455d856287:g:KQYAAeSwIURpYSG5&itmprp=enc:AQALAAABAO7PUuNWmJ++UShgI9tQz/pOiAPdt9tBGwoOOjPxYvP5gikI0QoAoqTvtk1wEh+ri+JKD4cJlIJKkDwQVdZeWxmuGpEsQuzgbeJQ/0G/5rpwV0Mru9edx4CF0fBHX6Jma7Aj1+iAei2SRMwcEtaqJqj53Vp+VbNoPKm+uEEm2mIVIFBLHlzHbGNSHei0X37JgtM0RhwUScb+pGX1mcwEnSwe8Hej/aQv2asLAxxq8mYyAn6UyHyQdl+wXMOF9mtHjdkUkMCPkDtGGg4i2MAAiwwK7pDdGg6bN7TwhooBMErkkwJ7HfNYWa/JzCKFk0I13tgOYueiWOyjXyOoT2mnerg=|tkp:Bk9SR-KptJT9Zg

View attachment 1981944

Awesome! Thank you

 

[Mopar John]

I don't think that one of those main track rollers will work on the short track at the back.
Don't ask me how I know!
That small track takes a double roller.
The one roller is pressed onto or formed around a ball end.
The other roller slides on the stud end and is held on with a clip.
I have attached a picture of these pieces.
Because of the double roller situation they are the most common to fail.
MJ

 

[Wcotner96]

I don't think that one of those main track rollers will work on the short track at the back.
Don't ask me how I know!
That small track takes a double roller.
The one roller is pressed onto or formed around a ball end.
The other roller slides on the stud end and is held on with a clip.
I have attached a picture of these pieces.
Because of the double roller situation they are the most common to fail.
MJ

View attachment 1982263

I did figure that out today and I ordered the new hardware kit, thank you!