• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1970 road runner throttle return spring

barryv

Well-Known Member
Local time
7:51 PM
Joined
Mar 23, 2013
Messages
204
Reaction score
64
Location
middleburg,fl
hi ,does anyone have closeup pic of were the long springs for throttle return on a 1970 383 road runner auto.thanks
 
???? I'm guessing you want to know where the throttle return spring attaches at both ends ????? Carb side- in between the "split" on the end of the throttle cable on the throttle shaft itself (sandwiched in the gap of that split). Other end, on a return spring bracket bolted to the front intake manifold bolt, driver's side/front. The "locator" tip of that bracket goes into an unused hole (threaded I think) on the head if I'm remembering correctly.....pretty much the same on all big blocks w/4 bbl. carbs.
 
do you happen to have any close up pictures.thanks

I don't have a 383, but does this help?
upload_2017-6-27_20-37-3.png


Not a stock engine, but all the throttle return spring stuff looks stock.
 
Auto Transport Service
Back
Top