• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1973 Plymouth Satellite parting out...

Status
Not open for further replies.
How much for the AC vents and ducts shaded in this diagram?
20171027_192128.jpg
 
Looking for the windshield washer set up front the tank to the nozzles. Can you help?

Thnx.
 
Hello FBBO members,
I would like to buy the old cracked dash pad
Parting out a 1973 Plymouth Satellite. This was a 318 auto with A/C, buckets, slap stick, rallye cluster, tan interior. No motor.

Sorry but I'm late posting this ad and some parts have been already sold, they are:

RH fender
LH fender
Trunk lid
RH door
Front windshield
Rear bumper/brackets/reinforcement bracket
Tail light lenses (housings still available)
Upper cowl
Bucket seats
A Pillar trim RH & LH(interior)
Rallye gauge cluster
Trans.
K frame

Prices on some of the key parts:

Grille PIECES for repairing other grilles $30.00
Grille upper trim, dents $50.00
Header paner trim, dents $50.00
Flat hood $50.00
Roof $350.00
Front disc brakes set-up 11" pin type (spindles/knuckles/rotors/calipers&bracket) $275.00
Upper A Arms $50.00 (pair)
Lower Control Arms $50.00 (pair)
Rear windshield (factory tint) $100.00
Rear windshield Trim (aluminum) $100.00 complete
Front windshield Trim (top aluminum, bottom and corners stainless) $100.00 complete
Side door glass tint $40.00 each
Quarter glass tint $40.00 each
Front bumper shell $125.00
Front bumper brackets $75.00 pair
Front bumper reinforcement bracket $50.00
Front bumper guards $100.00 pair
LH door $150.00
Header panel $100.00
Headlight bucket brackets/buckets/rings $60.00 pair
Front valance (thrashed) $40.00
Rear valance, 1 brace needs welded back on, surface area mint $175.00
Rear tail light housings $125.00
Front lower door panels (tan) no chalking $60.00 (pair)
Front upper door panel, tan with wood grain (RH) descent shape $30.00
Rear upper door panels, tan with wood grain fair shape $30.00 pair
A/C heater control very clean no cracks, no broken vac ports $75.00

Auto Slap Stick (linkage sold)
- Shifter (no T handle, no bezel) $75.00
- Console brackets (3) $75.00
- Console brackets attached to floor/hump cutout section $125.00
- Wood grain plate (needs new wood grain paper) $40.00
- Tan console shell (no door, broken, cracks) $30.00

Many more parts, please ask if available and for pricing. Pics available upon request.

Prices above do not include shipping cost. Parts are located in Las Vegas, NV. Local pick up is available. I can ship Greyhound for big parts.

Thanks

View attachment 440753 View attachment 440754 View attachment 440755 View attachment 440756 View attachment 440757 View attachment 440758 View attachment 440759 View attachment 440760 View attachment 440761 View attachment 440762
 
Do you still have the driver side mirror? I need one.
Thanks
 
Thanks, I have one in worse condition, however I think I really need the matching passenger side more. Can't remember which side I have. Do you have a passenger side one? I didn't see it listed.
Thanks again
 
Thanks, I have one in worse condition, however I think I really need the matching passenger side more. Can't remember which side I have. Do you have a passenger side one? I didn't see it listed.
Thanks again


No I do not have a pass. side mirror.

I'm confused, you asked for a driver's side mirror in your 1st reply and said you have one in worse condition(meaning my driver's side mirror would be in better condition) in your 2nd reply.

And now say you need a pass. side one???
 
I'm sorry, I must first verify what I have. Haven't looked at it in 5 years. I am pretty sure I will still want to buy yours either way. I think mine is pitted pretty bad. I will let you know. I am at work at the moment. Thanks
 
I'm sorry, I must first verify what I have. Haven't looked at it in 5 years. I am pretty sure I will still want to buy yours either way. I think mine is pitted pretty bad. I will let you know. I am at work at the moment. Thanks


Oh okay I got it now. I'll wait for your reply.

Thanks
 
How much for a floor shift column (really only looking for the 3 collars for the floor shift to convert mine over if you had a parts column).. but if price is good buy entire column
 
How much for a floor shift column (really only looking for the 3 collars for the floor shift to convert mine over if you had a parts column).. but if price is good buy entire column


Sorry but the steering column has been sold. I need to update this thread of sold parts.

Thanks for asking.
 
Great, PM me if you do!


Sorry for the late reply but I cannot seem to find these washer nozzles. I really thought I had some. If I stumble across them in the future I will let you if you're still looking for some. Once again I apologize.
 
Updated on listed parts that were sold:

- Steering Column
- Under dash rallye cluster wire harness
(I have another parts harness from a 74 Charger w/rallye cluster)
- Driver remote mirror
- Flat hood
- A/C Heater box
- Lower Control Arms
- Auto Slap Stick shifter (still have floor board brackets)
- Rear license plate assembly

Many parts still available please ask.
 
HI, do you have any of the J Nuts that hold the belt moldings to the top of the doors and 1/4s?
Thanks
Bob
 
Thanks but 3/4" is not long enough. I'm about to trim the edge down if I can't find any that are a 1' deep soon.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top