#3 plug buried

[Geff McCarthy]

I have changed out the wires and plugs, but cannot reach #3 with any tool. It seems the oil stick tube is in the way, plus maybe the new Lares box. Ideas please!

 

[Green72]

There's always one!!! Can you unbolt the dip stick and move it out of the way?

 

[dadsbee]

Underneath and a wrench... you can do it!!

 

[RemCharger]

Spark plug sockets have a hex on the end..

 

[Geff McCarthy]

thank y'all. I was dreading the requirement to unbolt the motor mount and raise the motor....

 

[Bird 426]

You'll forget about it when bragging, yeah , it's got a big block in it.

 

[1 Wild R/T]

Underneath and a wrench... you can do it!!

Exactly... Pretty easy...

 

[PurpleBeeper]

These guys are right. Go underneath the car and reach up with a closed end 13/16”. You can unbolt the dip stick tube & just bend it (slightly) out of the way

 

[1967coronet]

Careful grasshopper.

 

[Nacho-RT74]

The correct method is proceed from underneath. From top is hard with #3. #5 and #7 gets the steering column shaft on the way but even makes a bit harder, is posible. Brake booster makes a bit uncomfortable also for the #7.

Passenger side is easier and can be made from top

 

[ksurfer2]

I got these a few years ago for my Caddy, and they work great. I use them now on on 64 dodge with a 440 and headers on the passenger side. They make removal and reinstall a breeze where a regular socket wont reach and you cant fit a box wrench

https://www.ebay.com/itm/3576048424...ATo3DgMK_oWLh6j_rAHiKh0iP53xgblkaAr5tEALw_wcB