4 BBL Air Cleaner base for A12 Hood ?

[Gary Gaz]

Hi
I was looking for a 4 barrel carb base to fit my glass hood.
Something like the attached picture, seems were around years ago
Any ideas
Thanks

 

[dan juhasz]

try these guys Shaker Cuda Hemi Mopar Auto Parts | ShakerHood Products

 

[Gary Gaz]

try these guys Shaker Cuda Hemi Mopar Auto Parts | ShakerHood Products

Thanks Dan,
I had a look earlier they have ones for the 6 pack only
A12 Lift Off Hood Air Cleaner Road Runner 69 1/2 - Shaker Cuda Hemi Mopar Auto Parts | ShakerHood Products
was wanting one to fit a 4 bbl setup.

 

[gkent]

I wouldn't mind one of those also. The dilemma would be - would it fit with and Indy single plane intake.

 

[dadsbee]

@Chryco

 

[gkent]

@Chryco

Nope !

 

[dan juhasz]

Thanks Dan,
I had a look earlier they have ones for the 6 pack only
A12 Lift Off Hood Air Cleaner Road Runner 69 1/2 - Shaker Cuda Hemi Mopar Auto Parts | ShakerHood Products
was wanting one to fit a 4 bbl setup.

I misunderstood what you were after.

 

[GTX JOHN]

I believe you will need the top as well as bottom
because as I recall the spacing on the studs that
hold the top on are in a different location than the
6 pack top.

I have a 1969 Roadrunner Air Grabber top and bottom Air Cleaner assembly
in very nice shape = Original Paint and even the "Coyote
Duster" Decal is in nice shape on the top.
$650.00

You would have to fabricate a seal to match you hood assembly.

I have never seen a Mopar factory 4 Brl. that has that ducting.

 

[Gary Gaz]

I wouldn't mind one of those also. The dilemma would be - would it fit with and Indy single plane intake.

Now I have found the base dimensions, I wonder if you could get one folded up out of metal and graft a 4BBL base to that tray then find a way to seal to Hood

 

[gkent]

Now I have found the base dimensions, I wonder if you could get one folded up out of metal and graft a 4BBL base to that tray then find a way to seal to Hood

Sounds like a piece of cake to me.