Terry Host
Member
Hello, my name is Terry and I'm the new guy on the forum looking for some advice. I've been installing a 512 low deck motor into a 1967 GTX, the car didn't have a engine when I bought it. It previously had a 426 Hemi so I changed out the hemi k member with a k member from a 66 Plymouth. I've ran into several problems, the pitman arm is rubbing the headers and the 7 1/2 at oil pan is resting on the center link. I'm sure I'll be able to heat up the header and put a dimple in it but the center link is the big problem. Is it possible to put a dimple across the pan where the center link is contacting it, I'd hate to pull the motor to swap out the oil pan. Is it possible I need different motor mounts ? I can get the bolts in the motor mounts and tighten them down. Need some advice, thanks.