• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

440 6bbl decal placement

Bill Monk

Well-Known Member
Local time
6:19 AM
Joined
Feb 27, 2017
Messages
2,241
Reaction score
2,642
Location
West Virginia
Does anyone have the measurements on correct 440 6bbl decal placement for the hood on a roadrunner?
 
On mine the top right of the 0 begins 2 7/8's from front of the scoop. I don't know if that is right.
 
I've never measured one, but in general the "440+6" goes exactly on the sides of the air grabber scoop. If you get no response at all & don't have an A/G hood, then PM me and I'll take a couple measurements.

Never mind.... I see from another post you've got a '69 RR
 
Last edited:
I've never measured one, but in general the "440+6" goes exactly on the sides of the air grabber scoop. If you get no response at all & don't have an A/G hood, then PM me and I'll take a couple measurements.

Never mind.... I see from another post you've got a '69 RR
Yeah, I have an A-12 hood
 
Here is my A12 hood
hood.JPG
 
Auto Transport Service
Back
Top