489 sure grip part number needed.

[BeepBeepRR]

I have just about everything I need to put the sure grip together. I am missing one thing that I can tell. If someone knows the part number or if they have a complete yoke with the I guess dust shield on it let me know. But here is a picture i took from this site and put a red arrow pointing to the part I need. I bought a yoke from here a while back but cannot remember who I got it from.

 

[blue69runner]

Thought that dust shield pressed off. Have you tired Doc. Diff. Got A yoke from him for the 8 3/4 I have. Just my two cent's.

 

[BeepBeepRR]

I looked on that site but could not find just that shield. I did just find one for sale on here as a complete set new. 100.00 plus shipping but I think I paid 50? for the Yoke I bought from someone here. I guess I need to do a spline count on the pinion to be sure and get the correct yoke. The one I have fits just missing that dust shield.

 

[Fran Blacker]

Think you could buy a 7260 yoke with a dust shield and it would fit a 7290 or a 1350 yoke. You have yoke with no dust shield, correct.

 

[Fran Blacker]

Got a 7260 I can remove shield from or send you the whole thing $20 plus shipping. The one on left. Looking at picture the OD of the 7260 shield diameter may not be as large as the 7290 29 spline on right, Won't sell shield off 7290.