Contact seller
Selling a 2 year old used gas tank purchased from Layson's Restoration. Assembly includes tank, strap, J-bolt, tar paper pad and a repro 3/8" sending unit (very accurate with my 73-10 ohm Stewart-Warner gauge). Very good used condition. Here's what Layson's ad says about it:
Fuel Tanks
"These Reproduction Fuel Tanks are high quality Ni-Tern LT35 steel and are leak tested twice underwater to assure flawless performance. Each Tank is assembled on a low-scratch assembly line, wrapped in plastic foam, shrink-wrapped and then boxed in heavy-gauge corrugated cardboard so they arrive in great shape. PLEASE KNOW – THESE ARE NOT THE CHEAP CHINESE JUNK ALSO ON THE MARKET FOR HALF THE PRICE…OTHER RETAILERS ARE SELLING THEM AND THEY ARE NOT THE SAME QUALITY - FIT ISSUES, MADE OF CHEAP STEEL THAT WILL RUST INSIDE AND OUTSIDE UNLIKE THE Ni-Tern LT35 TANKS THAT WE SELL THAT WILL NOT RUST – PERIOD! THERE IS A BIG DIFFERENCE…WE CAN SUPPLY THE CHEAPER CHINA PIECES IF YOU ARE REALLY GUN HO ABOUT GETTING ONE, BUT WE WILL NOT WARRANTY THEM…"
Due to the size of these tanks, they are shipped UPS oversize.
QA-CR12A FITS:
Fuel Tank - 1963 330 & 440 (except station wagon), 1962-63 Belvedere, Fury, Sport Fury & Savoy (except station wagon), 1963 Polara and Polara 500 Fuel Tank - *15 gallon
62 -63 B-Body
* Actually 18 gallons in this case. Tank made in Canada.
All these parts were purchased from Layson's at the same time and together cost $328.95 plus shipping.
My price is $150.00 plus shipping.
Fuel Tanks
"These Reproduction Fuel Tanks are high quality Ni-Tern LT35 steel and are leak tested twice underwater to assure flawless performance. Each Tank is assembled on a low-scratch assembly line, wrapped in plastic foam, shrink-wrapped and then boxed in heavy-gauge corrugated cardboard so they arrive in great shape. PLEASE KNOW – THESE ARE NOT THE CHEAP CHINESE JUNK ALSO ON THE MARKET FOR HALF THE PRICE…OTHER RETAILERS ARE SELLING THEM AND THEY ARE NOT THE SAME QUALITY - FIT ISSUES, MADE OF CHEAP STEEL THAT WILL RUST INSIDE AND OUTSIDE UNLIKE THE Ni-Tern LT35 TANKS THAT WE SELL THAT WILL NOT RUST – PERIOD! THERE IS A BIG DIFFERENCE…WE CAN SUPPLY THE CHEAPER CHINA PIECES IF YOU ARE REALLY GUN HO ABOUT GETTING ONE, BUT WE WILL NOT WARRANTY THEM…"
Due to the size of these tanks, they are shipped UPS oversize.
QA-CR12A FITS:
Fuel Tank - 1963 330 & 440 (except station wagon), 1962-63 Belvedere, Fury, Sport Fury & Savoy (except station wagon), 1963 Polara and Polara 500 Fuel Tank - *15 gallon
62 -63 B-Body
* Actually 18 gallons in this case. Tank made in Canada.
All these parts were purchased from Layson's at the same time and together cost $328.95 plus shipping.
My price is $150.00 plus shipping.