64 Dodge Backspace

[Bbodydodge]

I was told a 29x14.50x15 with a 7" BS
will fit a 64 .I
it has a mini tub and Spring relocation done.
Does anyone run this set up ?
Also can I go just a tad wider 29x15.50x15
Stock width rear .

 

[65hemi]

On my 65, I have 315/60-15 (30x13.5R15) MT drag radials. Mini tub & springs relocated.

 

[NCC1968]

I'm planning on 29X18.00X15...........I wonder if I use that back space if they will fit on my tubbed 4link stock axle tube

 

[blumaxsavoy]

b bodydodge; some years back I had pro trac street tires on my 64. They measured apox 31" tall and were 14" side wall to sidewall on a 10" wheel w/ 7" back space 3" front. Part # was s375. Coker now makes them. This pic is those tires. If you look at page 32 in the 62-65 car show thread I posted pics w/ M/T street ET's that are 31x14.50x15 on same wheel. The pro Tracts were a snug fit but never any issues. The M/Ts are a more comfortable fit. Hope this helps.
I have the same mods as you. Tom

- - - Updated - - -

65HEMI; Beautiful!

 

[Bbodydodge]

Yes this helps a lot ,
I ty u guys for the info .
29 X 14.50-15 it is with 7" bs

 

[malex]

I was told a 29x14.50x15 with a 7" BS
will fit a 64 .I
it has a mini tub and Spring relocation done.
Does anyone run this set up ?
Also can I go just a tad wider 29x15.50x15
Stock width rear .

315/60/15 on a 10" rim. Mini tubbed and springs relocated. Loads of room on both sides of the tires.

 

[lxmodguy]

315/60/15 on a 10" rim. Mini tubbed and springs relocated. Loads of room on both sides of the tires.View attachment 291737

im running the same with a narrowed rear end and a 3.5 bs wheel