lxmodguy
Gen3 Hemi Guru
Contact seller
I am not sure why my last thread was locked. Maybe from too much time with no activity. This is my 64 Polara. It is a full Chromoly tube chassis with Chromoly suspension and rear end housing. It has disc brakes at all four corners. Coil overs at all 4 corners. The floor is being fabricated as we speak. It will be a steel wheel tube and steel floor car. The front frame rail is intact so if you wanted to do drag week or no prep racing there are plenty of categories to race in. Because of the coil over front suspension, it isnt eligible for superstock racing. HOWEVER, you could put a stock K member back under the car and I do have one for it. Car is two tone black on top and midnight blue on the bottom. So much time and money has gone into the car it's obscene. It is setup for a gen3 hemi. I have a fully forged gen3 motor with CNC ported heads that should make 1000+ wheel that can be bought with it or it can be sold without it. It you buy the motor with it youll get the custom fabricated turbo headers and the other stuff to finish the build
North texas
25k without the motor, 35k with everything to finish it
North texas
25k without the motor, 35k with everything to finish it