65 belv trans mount?

[1965belvedere2]

65 belv2 273/904. i cant find a trans mount. Anyone have any resources?

 

[Dave6T4]

Joe Suchy in Georgia. RockAuto.

 

[Timmayy]

Yes Joe Suchy should be able to help you out. I've gotten a few "hard to find" parts from him for my 65 Belvedere wagon.

 

[Darter6]

Anchor is a manufacture of engine/transmission mounts. As Dave6T4 stated You may be able to get them from Rock Auto.
I got Anchor engine mounts for my 63 Belvedere from Parts Geek.

 

[1965belvedere2]

Ebay no, Amazon no, all the local parts stores no, Rock auto no, anchor no, NPD no, Joe Suchy YES! Just spoke with him. Hes very helpful. expensive, but hes the only game in town.

 

[T Brashears]

I have one.

 

[matthon]

I needed a trans mount for my 64 318 poly push button. No luck.

My 67 bb 4 speed a-body has the same mount except only 1 bolt on the bottom.

If it's good for a 4 speed bb, why not a poly auto.
Readily available, cheap, bolt in.

 

[Geoff 2]

Is that the correct mount for 1965? I thought the rubber section was wider, 1965 being the last year of the wide mount.

 

[T Brashears]

It was on my 65.The bolt spacing where it attaches to the trans is wider than 66 up,that's why I changed it.

 

[1965belvedere2]

the mount that i posted pics of was the original one from the car, I also have the one with 1 post, the plate that bolts to the trans isnt wide enough and the offset is not right

 

[T Brashears]

I now have the one stud type in my 65 with a 70 ish trans.