65 Belvedere gas pedal location ?

[65hemi]

The driver's side floor pan was replaced in my 65. The holes for the gas pedal studs are missing. Before I start drilling holes, does someone have a picture showing the location of the holes in the floor pan?

 

[Tempest 455]

I can go take a pic tonight.

 

[5.7 hemi]

Bolt it to the firewall, an d where the pedal lands, dill the 2 holes.

 

[65hemi]

Thanks Tempest.

5.7, the pedal itself does not bolt to the firewall. The "throttle level" that is bolted to the firewall has a little wheel that rides on the back of the pedal. The pedal is bolted to the floor.

 

[5.7 hemi]

I know, but you can still get it really close by moving the down for full throttle. It's pretty easy.

 

[65AFX]

Attaching photos of my 65 coronet. There is a depression in the floor just as it begins its vertical climb up. The bolt holes are centered side /side in that depression. The centerline of the two mount holes is 5-1/4" above the large hole on the floor. On the under side there is a reinforcing bracket.

 

[65hemi]

great detailed pics !!!