• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

65 Coronet H/T

Status
Not open for further replies.

65-440

Well-Known Member
Local time
11:33 PM
Joined
Dec 2, 2009
Messages
3,378
Reaction score
3,022
Location
virginia beach, va
Feedback: 1 / 0 / 0
Contact seller
Time to sell my '65. Asking $17,000, price negotiable. 446ci., performer rpm heads, the heads were sent to some guy in ct. or ri. and worked but i lost the paperwork and no longer have the specs. performer RPM manifold, Dougs 2" headers, accell billet distributor, MSD 6AL ignition with rev control, taylor 10.5mm wires, alluminum waterpump housing and pump. 160 deg thermostat. just cleaned the radiator out last month. Motor runs VERY strong. 727 built last year. 3800 stall built by dynamic converters, coan super sprag, new drums, clutches, Griner reverse pattern, non-low band apply valve body, dual circuit/ 16 pass trans cooler w/electric fan. 8 3/4 rear. 4.10 gears. brand new clatracs bars, mono-leaf springs.. rancho 5 way adjustable shocks.. all hardware inside drums is new ... front end is solid with a recent re-build, installed caltracs 90/10 shocks the same time that i did the rear... paint is ok, car does need some cowl work .. interior is complete, could use a set of door panels, headliner is mint, floors and trunk are solid..fuel tank has a sump welded in the front, w/ -10an fitting. was going to use that to feed the fuel pump.. im sure im forgetting a whole bunch of stuff ... been down the track a few times, car ran great, high 11's all day long. very consistant. Also very responsive on the street, gets more street time than track time .. having trouble locating all of my pictures, will try and get more tomorrow after work .....
 

Attachments

  • DSCN2195.jpg
    DSCN2195.jpg
    109.3 KB · Views: 1,828
  • DSCN2679.jpg
    DSCN2679.jpg
    108.1 KB · Views: 2,920
  • DSCN2682.jpg
    DSCN2682.jpg
    127.9 KB · Views: 2,007
  • DSCN2703.jpg
    DSCN2703.jpg
    97 KB · Views: 1,688
  • DSCN2704.jpg
    DSCN2704.jpg
    95.9 KB · Views: 1,674
  • DSCN2197.jpg
    DSCN2197.jpg
    95.5 KB · Views: 1,683
  • DSCN2196.jpg
    DSCN2196.jpg
    92.8 KB · Views: 4,865
a couple more
 

Attachments

  • DSCN2760.jpg
    DSCN2760.jpg
    153.8 KB · Views: 1,565
  • DSCN2761.jpg
    DSCN2761.jpg
    120.3 KB · Views: 1,554
  • DSCN2762.jpg
    DSCN2762.jpg
    130.8 KB · Views: 1,544
  • DSCN2763.jpg
    DSCN2763.jpg
    74.5 KB · Views: 1,574
i have a 1971 Plymouth Scamp, it's originally from VA, it has a 340 with edelbrock rpm heads, roller cam, M-1 intake, holley 800 dp carb, full MSD ignition, hooker supercomp headers, 727 trans with reverse pattern valve body, and 4000 stall convertor, 8 3/4 rear with 430 gears, car runs great, 11.40's n/a 10.30's on a 150 shot. motor is fresh. also has weld drag lights with fresh rear rubber. can send pics if interetsed
 
i know the time of the year sucks ..... ad does say " price negotiable " ... i know someone out there knows somebody who knows somebody that likes this car !!! ...
 
It looks like one hell of a car. Heck, I'd love to snag that engine to put into my Roadrunner. Sadly, humble budgets do not permit my indulgence in another toy car. I will ask around to some people though and pass the word on though. Best of luck!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top